Restore your boat in six easy steps!
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Restore your boat in six easy steps!
Certain things are just too much fun to enjoy alone. Like this link that I stumbled across.
Who knew it was as simple as this? Link: How to Restore a Sailboat
At least they gave it a "Challenging" difficulty rating.
Who knew it was as simple as this? Link: How to Restore a Sailboat
At least they gave it a "Challenging" difficulty rating.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Candidate for Boat-Obsession Medal
- Posts: 349
- Joined: Tue Apr 05, 2005 5:26 pm
- Location: On the move
- Contact:
Ok, six steps to nautical bliss...
1 Fall in love, and buy the boat
2 Forget the budget, it's going to cost more anyway... What the boat wants the boat gets... Where did I hear that???
3 Seek out parts for your sailboat, but keep in mind a large percentage of these will be replaced because they don't workout as planned.
4 Haul the boat to Tim's place.
5 Keep up on what's going on via the internet, by phone and with periodic visits.
6 Haul the boat to the launch point and go sailing.
See Tim, it really is that easy... :D
1 Fall in love, and buy the boat
2 Forget the budget, it's going to cost more anyway... What the boat wants the boat gets... Where did I hear that???
3 Seek out parts for your sailboat, but keep in mind a large percentage of these will be replaced because they don't workout as planned.
4 Haul the boat to Tim's place.
5 Keep up on what's going on via the internet, by phone and with periodic visits.
6 Haul the boat to the launch point and go sailing.
See Tim, it really is that easy... :D
-
- Skilled Systems Installer
- Posts: 178
- Joined: Sat Mar 31, 2007 4:38 am
- Boat Type: O'day Mariner, Pearson Triton
- Location: Canada
-
- Master of the Arcane
- Posts: 1317
- Joined: Thu Dec 28, 2006 8:50 am
- Boat Name: Hirilondë
- Boat Type: 1967 Pearson Renegade
- Location: Charlestown, RI
I use a perpetual list. Every time I think of something, it goes on the list. Every time I have some money and time I prioritize the list and start work on #1. My list never seems to go away, but I often keep it from growing much faster than items are completed. Since my original winter projects the boat has always been sailable each spring. I consider this success, which is good, because I can't do any better.
Anyone who thinks they can predict a budget, be it money or labor is only fooling themselves.
Anyone who thinks they can predict a budget, be it money or labor is only fooling themselves.
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
- gone2ddogs
- Deck Grunge Scrubber
- Posts: 47
- Joined: Wed Aug 23, 2006 6:08 pm
- Boat Name: Silver Girl
- Boat Type: Pearson Triton
- Location: Utah
- Contact:
#5 ".........find a person who makes customized sailboat parts."
Maybe this should say "Buy a Lathe, a mill, anodizing tank, TIG welder, Plasma cutter, Table saw, joiner, drill press......... and make your own parts".
John
Triton #15 Yawl Silver Girl
Now I just need a shop big enough to fit the tools and the boat.
Maybe this should say "Buy a Lathe, a mill, anodizing tank, TIG welder, Plasma cutter, Table saw, joiner, drill press......... and make your own parts".
John
Triton #15 Yawl Silver Girl
Now I just need a shop big enough to fit the tools and the boat.
-
- Skilled Systems Installer
- Posts: 178
- Joined: Sat Mar 31, 2007 4:38 am
- Boat Type: O'day Mariner, Pearson Triton
- Location: Canada
-
- Boat Obsession Medal Finalist
- Posts: 684
- Joined: Wed Jan 25, 2006 6:28 pm
- Location: Beaufort, North Carolina
- Contact:
I'm thinking a boat big enough to fit all the tools... (Grin)gone2ddogs wrote:#5 ".........find a person who makes customized sailboat parts."
Maybe this should say "Buy a Lathe, a mill, anodizing tank, TIG welder, Plasma cutter, Table saw, joiner, drill press......... and make your own parts".
John
Triton #15 Yawl Silver Girl
Now I just need a shop big enough to fit the tools and the boat.
1961 Pearson Triton
http://pylasteki.blogspot.com/
1942 Coast Guard Cutter - Rebuild
http://83footernoel.blogspot.com/
http://pylasteki.blogspot.com/
1942 Coast Guard Cutter - Rebuild
http://83footernoel.blogspot.com/