Sailboats with dreamy engine access?
-
- Topside Painter
- Posts: 135
- Joined: Wed May 04, 2005 12:27 pm
Sailboats with dreamy engine access?
Having almost reached the point of giving up this old boat nonsense because I'm tired of playing mechanic when I should be sailing, I started wondering: what sailboats have REALLY good engine access? I mean the kind where you can rebuild the damn thing sitting in some exotic anchorage.
My Tartan 27 has ok access for a boat its size, but of course, all the parts I've been dealing with lately are still a real pain to get at. And forget about the stuffing box altogether.
In the midst of sailorly cursing spells, with wrench in bleeding hand, I find myself grunting "I SWEAR my next boat, if there is one, will have 100% contortion-free engine access!".
The only boats I currently know of (because they're cousinships) are the Tartan 34C and Tartan 30, both of which have the engine in the middle of the salon hiding under a removable partial bunk.
Can anyone point out others for the "next boat" list? Let's say arbitrarily under 45 feet. Over that and poor engine access is inexcusable on the builder's part.
And yeah, I know, "shoulda repowered with the Yanmar I quoted for you instead of that Atomic bomb", as the marina guys keep reminding me.
Tartan 34
Tartan 30
My Tartan 27 has ok access for a boat its size, but of course, all the parts I've been dealing with lately are still a real pain to get at. And forget about the stuffing box altogether.
In the midst of sailorly cursing spells, with wrench in bleeding hand, I find myself grunting "I SWEAR my next boat, if there is one, will have 100% contortion-free engine access!".
The only boats I currently know of (because they're cousinships) are the Tartan 34C and Tartan 30, both of which have the engine in the middle of the salon hiding under a removable partial bunk.
Can anyone point out others for the "next boat" list? Let's say arbitrarily under 45 feet. Over that and poor engine access is inexcusable on the builder's part.
And yeah, I know, "shoulda repowered with the Yanmar I quoted for you instead of that Atomic bomb", as the marina guys keep reminding me.
Tartan 34
Tartan 30
Tartan 27
Brooklyn, NY
Brooklyn, NY
- catamount
- Candidate for Boat-Obsession Medal
- Posts: 378
- Joined: Sun Jun 19, 2005 7:30 am
- Boat Name: GREYHAWK
- Boat Type: Peterson 34
- Location: Boothbay Harbor, ME
- Contact:
This is on a custom Peterson 34
(hard to beat an outboard for accessibility)
Last edited by catamount on Thu Apr 30, 2009 7:26 pm, edited 1 time in total.
Tim Allen -- 1980 Peterson 34 GREYHAWK
Harborfields Housekeeping Cottages, West Boothbay Harbor, Maine
Sailors for the Sea, a new voice for ocean conservation
Harborfields Housekeeping Cottages, West Boothbay Harbor, Maine
Sailors for the Sea, a new voice for ocean conservation
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Want good engine access on any boat?
Buy a project boat, and rebuild the interior--and the engine access-- to suit your requirements. It doesn't take much extra room to increase the access appreciably. Typically, though, it would require a pretty major rebuild of the interior on most boats--all well and good if you want to do that.
Unfortunately, most boats have similar engine access problems. Most buyers don't want to be reminded of the presence of their engines very much, and it might (gasp!) intrude on that precious interior space. Since the market demands maximum space inside, the engine and systems get relegated to the tightest compartment in the boat.
The Tartans are unique in their engine placement. I think it works better on the 34C than on the 30, myself. Unfortunately, this is a rarity, and other than some of the older Catalinas that had an engine inside the galley island (and not as accessible as the T34C), I don't know of any production boats with this sort of access.
Buy a project boat, and rebuild the interior--and the engine access-- to suit your requirements. It doesn't take much extra room to increase the access appreciably. Typically, though, it would require a pretty major rebuild of the interior on most boats--all well and good if you want to do that.
Unfortunately, most boats have similar engine access problems. Most buyers don't want to be reminded of the presence of their engines very much, and it might (gasp!) intrude on that precious interior space. Since the market demands maximum space inside, the engine and systems get relegated to the tightest compartment in the boat.
The Tartans are unique in their engine placement. I think it works better on the 34C than on the 30, myself. Unfortunately, this is a rarity, and other than some of the older Catalinas that had an engine inside the galley island (and not as accessible as the T34C), I don't know of any production boats with this sort of access.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Candidate for Boat-Obsession Medal
- Posts: 340
- Joined: Tue Jun 20, 2006 8:35 pm
- Location: MA and RI
-
- Master Varnisher
- Posts: 118
- Joined: Tue Nov 15, 2005 8:04 pm
- Boat Name: Wind Horse
- Boat Type: 1974 Dufour 27
- Location: Casco Bay
- Contact:
-
- Topside Painter
- Posts: 135
- Joined: Wed May 04, 2005 12:27 pm
Catamount's P34 reminds me that there are a lot of club racers out there with interiors so stripped down that the cabin practically IS just a garage for the auxiliary and sails! Probably not a bad starting point for my next project boat (w/ dreamy access).Buy a project boat, and rebuild the interior
Don Moyer often mentions the midship engine of the Catalina 30, but I couldn't find any good photos of it on yacthworld so, as Tim suggests, it's probably not as accessible as I'd like.
Tartan 27
Brooklyn, NY
Brooklyn, NY
-
- Candidate for Boat-Obsession Medal
- Posts: 375
- Joined: Wed Aug 24, 2005 1:42 pm
- Boat Name: Totoro
- Boat Type: Sea Sprite 23 (#626)
- Location: Scarborough, Maine
Like the man said:Tim wrote:Buy a project boat, and rebuild the interior--and the engine access-- to suit your requirements.
Mike
Totoro (SS23 #626)
Totoro (SS23 #626)
-
- Boat Obsession Medal Finalist
- Posts: 741
- Joined: Fri Mar 18, 2005 10:41 pm
- Boat Name: Rambunctious
- Boat Type: J/30
- Location: Mandeville, LA
- Contact:
The Catalina 30 engine access is pretty good. The engine is located beneath the U-shaped settee, low and near the centerline. Top access is great and side access is reasonable. You pay for this with a loud cabin when motoring. Which is OK with me as I'll be on deck in those circumstances, regardless of weather. I'll turn green as a pickle if I'm below with a running diesel.
Best photo I could find with a quick search
Other boats with good engine access that come to mind are the J30 and the Island Packets around 40 feet. The J30's companionway steps are molded fiberglass and they form a large part of the engine surround. When the steps are removed, it's easy to get to the top, front, and sides.
The Island Packet has similar front access and the rear and side of the engine can be reached through a large access panel in the aft cabin.
Best photo I could find with a quick search
Other boats with good engine access that come to mind are the J30 and the Island Packets around 40 feet. The J30's companionway steps are molded fiberglass and they form a large part of the engine surround. When the steps are removed, it's easy to get to the top, front, and sides.
The Island Packet has similar front access and the rear and side of the engine can be reached through a large access panel in the aft cabin.
- catamount
- Candidate for Boat-Obsession Medal
- Posts: 378
- Joined: Sun Jun 19, 2005 7:30 am
- Boat Name: GREYHAWK
- Boat Type: Peterson 34
- Location: Boothbay Harbor, ME
- Contact:
Nope. They just sit in plastic battery boxes on those platforms with a strap wrapped around them, nestled up against the engine box.Mark.Wilme wrote:Catamount - are those batteries temporary ?
My surveyor did think that was a little sketchy and recommended "Devise better means to secure the battery boxes in place." So I added fiddles to the platforms on which the batteries sit (this photo was taken before that, note also that the covers are off the boxes as we were attempting to charge the batteries). I expect to be constructing "built-in" battery boxes when I get around to working more on the interior systems -- perhaps re-locating them in the process.
Tim Allen -- 1980 Peterson 34 GREYHAWK
Harborfields Housekeeping Cottages, West Boothbay Harbor, Maine
Sailors for the Sea, a new voice for ocean conservation
Harborfields Housekeeping Cottages, West Boothbay Harbor, Maine
Sailors for the Sea, a new voice for ocean conservation
- Chris Campbell
- Candidate for Boat-Obsession Medal
- Posts: 422
- Joined: Tue Jun 06, 2006 9:18 am
- Boat Name: Luna
- Boat Type: Yankee 30
- Location: Chester, NS
- Contact:
A friend has a Downeast 32 - only 32 footer I've seen with an engine room you can climb into! It's not all that wide, but you can actually step over the engine and hang out behind it...
Link to Downeast 32 on Yachtworld
Link to Downeast 32 on Yachtworld
-
- Candidate for Boat-Obsession Medal
- Posts: 340
- Joined: Tue Jun 20, 2006 8:35 pm
- Location: MA and RI
I thought ABYC had recommendations on battery installation including tie downs and either covers or at least positive terminal protection - Tim should know more.
Probably not your cup of tea but the engine access on my Beneteau is pretty good - the entire front lifts / swings off. There is a 30" x 24" removable panel on each side. There are 12" x 30" panels on each side at the back and then there are two 15" diameter circles that lift out above it to allow light in as well as hands etc. Plus there is actually some room around the engine that I am not used to. Nothing like your picture of course but then it's not in the middle of my cabin either.
Probably not your cup of tea but the engine access on my Beneteau is pretty good - the entire front lifts / swings off. There is a 30" x 24" removable panel on each side. There are 12" x 30" panels on each side at the back and then there are two 15" diameter circles that lift out above it to allow light in as well as hands etc. Plus there is actually some room around the engine that I am not used to. Nothing like your picture of course but then it's not in the middle of my cabin either.
-
- Topside Painter
- Posts: 135
- Joined: Wed May 04, 2005 12:27 pm
Nice
Wow, MikeD, now that's more like it! That's on an Ariel? Good on ya.Like the man said:
And is that yellow heavy gauge battery cable I see, not the usual black? You must be ABYC poster boy of the month.
That is a legitimate engine "room" on that Downeast 32. Actually, on 2nd viewing, that's just a lot of boat in 32'. 11' beam.
Turns out the S&S 34 also has a midship engine.
Tartan 27
Brooklyn, NY
Brooklyn, NY
-
- Candidate for Boat-Obsession Medal
- Posts: 340
- Joined: Tue Jun 20, 2006 8:35 pm
- Location: MA and RI
- catamount
- Candidate for Boat-Obsession Medal
- Posts: 378
- Joined: Sun Jun 19, 2005 7:30 am
- Boat Name: GREYHAWK
- Boat Type: Peterson 34
- Location: Boothbay Harbor, ME
- Contact:
I've got tie downs and covers, believe me! You just don't see them in the photo, because to gain access to the batteries to temporarily attach a portable charger's alligator clips, you've got to undo the tie down straps and remove the covers. ...Mark.Wilme wrote:I thought ABYC had recommendations on battery installation including tie downs and either covers or at least positive terminal protection
Tim Allen -- 1980 Peterson 34 GREYHAWK
Harborfields Housekeeping Cottages, West Boothbay Harbor, Maine
Sailors for the Sea, a new voice for ocean conservation
Harborfields Housekeeping Cottages, West Boothbay Harbor, Maine
Sailors for the Sea, a new voice for ocean conservation
-
- Candidate for Boat-Obsession Medal
- Posts: 340
- Joined: Tue Jun 20, 2006 8:35 pm
- Location: MA and RI
-
- Topside Painter
- Posts: 135
- Joined: Wed May 04, 2005 12:27 pm
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Well, maybe for engine access, but hardly otherwise! :<)FloatingMoneyPit wrote:J30 goes right up there in the dreaminess hierarchy.
FWIW, those fiberglass engine/step boxes on the J/30 are a real pain to move around--heavy and bulky. But once you move it, the access is excellent, for sure.
For really good engine access, I suggest buying either a recycled grand prix IOR racer (which typically have nothing in the interior, and the engine is right out in the open with a flimsy box as a cover--along with the toilet right out there in the open...), or a working lobster boat (many of which place the engine forward inside the cabin, and wide open on all sides).
Never mind the potential shortcomings of either of these as a cruising sailboat!
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Candidate for Boat-Obsession Medal
- Posts: 375
- Joined: Wed Aug 24, 2005 1:42 pm
- Boat Name: Totoro
- Boat Type: Sea Sprite 23 (#626)
- Location: Scarborough, Maine
Re: Nice
Heh! I wish that were my engine room! The "poster boy" honor is Tim L.'s honor alone. It is Daysailor's engine room. Sorry, I thought it was clear.FloatingMoneyPit wrote:You must be ABYC poster boy of the month.
BTW, note that his is the only example of a boat less than 30 feet with good engine access though. Of course he had to gut it and build what he wanted, but still, pretty darn impressive, if you ask me!
Mike
Totoro (SS23 #626)
Totoro (SS23 #626)
-
- Skilled Systems Installer
- Posts: 244
- Joined: Sun Oct 16, 2005 8:33 pm
- Boat Name: Ariel
- Boat Type: Cape Dory 36
- Location: St. Joseph, Michigan
- Contact:
Not bad
Here's a cruiser that has relatively good engine access. I don't know that it's dreamy, but it's certainly better than most - especially with a removable cockpit sole.
Westsail 32
Westsail 32
-
- Boateg
- Posts: 1637
- Joined: Thu Apr 03, 2003 9:09 am
- Boat Name: Dasein
- Boat Type: Pearson Triton 668
- Location: Portland, Maine
- Contact:
I did!Mark.Wilme wrote:we can all guess who used yellow battery cable, can't we ?
Nathan
dasein668.com
dasein668.com
-
- Boateg
- Posts: 1637
- Joined: Thu Apr 03, 2003 9:09 am
- Boat Name: Dasein
- Boat Type: Pearson Triton 668
- Location: Portland, Maine
- Contact:
Double Pfft! My wiring was done before the daysailor!
;-P ;-P (That's your double pfft!)
;-P ;-P (That's your double pfft!)
Nathan
dasein668.com
dasein668.com
-
- Rough Carpentry Apprentice
- Posts: 71
- Joined: Fri Dec 30, 2005 8:56 pm
- Location: West Central Florida
Since you indicated under 45'
Take a look at the Westsail 42. It has an engine ROOM! Or to be nautical.
Dave-Westsail 42-Elysium
-
- Candidate for Boat-Obsession Medal
- Posts: 375
- Joined: Wed Aug 24, 2005 1:42 pm
- Boat Name: Totoro
- Boat Type: Sea Sprite 23 (#626)
- Location: Scarborough, Maine
How about this engine access for a Triton?? Made possible by a removable galley. It was posted recently on the Triton list. Very nice!
Sandpiper, Triton 129, After Salon
Sandpiper, Triton 129, After Salon
Mike
Totoro (SS23 #626)
Totoro (SS23 #626)