The Plastic Classic Forum, your free and in-depth resource for information on re/building classic sailboats. ... Be sure to visit / join our sister site at sailFar.net! ... And don't forget to check out Atom's Virtual Home Port! ...
I have a question regarding these two seacocks for my cockpit drains on my 1969 Bristol 29. They don't have a handle. I thought I have seen Spartan Marine seacocks without handles and I believe they sell handles. Could they be Spartans? Do I need one of their handles to open and close the valvle? Do they look in okay condition? Not sure what shape they should be in. I've read that you should obviously be able to open and close them and periodically service them. Not sure how exactly to service them where they are in hard to reach locations. The one on the starboard side (second photo) seems thru bolted, the port side one doesn't seem to be. Any thoughts? Thanks.
Those are indeed Spartan seacocks. You can use a wrench to open or close them, but I'd suggest the specific Spartan handles that are available through Spartan Marine's website: www.spartanmarine.com
If these haven't been operated for a while (and probably haven't, since there are no handles), approach them carefully and don't force the barrels. They may be (probably are) frozen in place. Fortunately, these barrel-type seacocks are easily serviced and can be disassembled in place. (You don't need to remove them from the hull). Undoing those nuts on the opposite side of the handle should allow the whole barrel to be slid out, after which it can be cleaned and regreased. If you go to the Cape Dory Board (www.capedory.org/board) and do a search, you'll find a number of posts that describe the servicing process in some detail.
---------------------------------------------------
Forum Founder--No Longer Participating
You guys are probably tired of hearing this, but .... a liberal dose of Tabasco Sauce, left to soak overnight, will often free-up frozen bronze parts. It's worked for me on serveral (but not all) occasions.
Rachel wrote:Perhaps it's a Canadian thing - the first time I got that tip was from a dock-mate in Brentwood Bay (B.C.), who'd used it in the Navy. Works, too! :-)
I too got it from a retired Canadian Navy guy. Maybe that's how they keep the fleet running ;-)