New Floor and Table w/Logo's
-
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Aug 23, 2006 11:11 am
- Location: Battle Creek, Mi
- Contact:
New Floor and Table w/Logo's
Were are in the process of building a new floor and table for our Columbia 34. Were are almost done with the floor just putting the varnish on. The table is almost done. Here are some pictures.
Table-
Table-
-
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Aug 23, 2006 11:11 am
- Location: Battle Creek, Mi
- Contact:
This if for the cockpit the center circle is for the edson steering and the rear circle goes around the emergency tiller. I will post some more pictures but in the one picture where just the border slats are installed you can see the 18 stainless steel washers. I used a forsner bit to recess the washers flush with the plywood, then once the center slats were installed and before i filled the gaps with the black epoxy, i cut the heads of some 1/4-20 stainless steel bots so they we 1/4" wide and fit perfect between the slats and went through the fender washers below. then filled the gaps to lock the bolts in and cover them up. this way i can build the floor 100% at home and then bolt into the boat with some sealant. We cut the Columbia with did with a scroll saw, and the Amorita i freehanded with a 1/8" router bit, in a porter cable router. The key is the clear stick on paper, I made all my designs in Autocad and then printed them fullsize which was a big help. The Amorita is just a font style, but the columbia had to be traced in CAD.
Scott
Scott
-
- Skilled Systems Installer
- Posts: 200
- Joined: Wed Jan 11, 2006 12:50 am
- Location: Massachusetts
- Contact:
-
- Master of the Arcane
- Posts: 1317
- Joined: Thu Dec 28, 2006 8:50 am
- Boat Name: Hirilondë
- Boat Type: 1967 Pearson Renegade
- Location: Charlestown, RI
You mean a new sole? (couldn't resist and had to beat Rachel)Columbia34 wrote:Were are in the process of building a new floor and table for our Columbia 34.
The results look great! I really like the hold down screws method. The lack of bungs makes for a really clean finish. I look forward to the "after" pictures.
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
-
- Wood Whisperer
- Posts: 649
- Joined: Fri Aug 19, 2005 7:42 pm
- Location: South coast of Texas, Matagorda Bay
rofl- she emailed me yesterday to tell me she was biting her tongue.Hirilondë wrote:You mean a new sole? (couldn't resist and had to beat Rachel)Columbia34 wrote:Were are in the process of building a new floor and table for our Columbia 34.
It is very work by the way. Looks VERY professional.
I sure hope it's oiled rather than varnished though.
-
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Aug 23, 2006 11:11 am
- Location: Battle Creek, Mi
- Contact:
-
- Skilled Systems Installer
- Posts: 200
- Joined: Wed Jan 11, 2006 12:50 am
- Location: Massachusetts
- Contact:
I have a quart of Epifanes Rubbed Effect interior varnish and thinner which I plan to use to touch up the interior of my boat. I am considering doing the sole as well as it could really use a cot. I am a little worried it may make it too slippery. What type of varnish are you using?
Fuji 32 Ketch "Excalibur"
Hee hee. Thanks Hirilonde!
The thing is, the sole is so fabulous, that I couldn't bear to rain on the parade. Wow.
At first I thought it was a cabin sole, but now I understand that it's a cockpit sole (right?). Are you using something like "Ultimate Sole" varnish to keep it from being too slippery? (I'm not sure that's rated for outdoor use, actually.)
I mention this because I once helped a guy flake a sail on a varnished teak foredeck (it was a flush decked boat, which only made things worse) and it was like being on a scary skating rink. Perhaps I missed that you have - or will have - some non-skid in the varnish, in which case --- nevermind!
Rachel
The thing is, the sole is so fabulous, that I couldn't bear to rain on the parade. Wow.
At first I thought it was a cabin sole, but now I understand that it's a cockpit sole (right?). Are you using something like "Ultimate Sole" varnish to keep it from being too slippery? (I'm not sure that's rated for outdoor use, actually.)
I mention this because I once helped a guy flake a sail on a varnished teak foredeck (it was a flush decked boat, which only made things worse) and it was like being on a scary skating rink. Perhaps I missed that you have - or will have - some non-skid in the varnish, in which case --- nevermind!
Rachel
-
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Aug 23, 2006 11:11 am
- Location: Battle Creek, Mi
- Contact:
Yes this is exterior and we are using flagship varnish 2015, in the last coat we will add some clear non-skid beads to the mix, if you do it in everycoat it will make the finish foggy even if the company selling says it won't. with the last coat with non-skid its still a nice clear smooth finish, and with a good pair of sailing shoes the footing is great. We don't have a teak deck, and if we did I would not varnish it, I like to swim on my own terms only.
Scott
Scott
-
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Aug 23, 2006 11:11 am
- Location: Battle Creek, Mi
- Contact:
- hebert01
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Sep 07, 2005 2:04 pm
- Boat Name: Allegra
- Boat Type: Pearson Ensign
- Location: Mattapoisett, MA
Scott- Great job!
I've been hesitant to try nonskid additives in traditional varnish, as I wasn't sure how it'd last over time. Have you given this a shot already, and did it hold up OK? I'm thinking of adding nonskid to the horizontal bench surfaces on my Ensign...it can get pretty slippery sometimes.
I've been hesitant to try nonskid additives in traditional varnish, as I wasn't sure how it'd last over time. Have you given this a shot already, and did it hold up OK? I'm thinking of adding nonskid to the horizontal bench surfaces on my Ensign...it can get pretty slippery sometimes.
Ed Hebert
ALLEGRA - Ensign #998
ALLEGRA - Ensign #998
-
- Wood Whisperer
- Posts: 649
- Joined: Fri Aug 19, 2005 7:42 pm
- Location: South coast of Texas, Matagorda Bay
I have-
I taped off some steps on a boat I built and loaded the area with sand- model railroad ballast sand in fact. That was four years ago and the owner is still quite happy with his non skid steps into the cabin.
I used Z-Spar 2015, which is my varnish of choice in our sun, inside and outside
I also have sand (sprinkled) in clear polyurethane on the steps on the captains ladder going to our loft bedroom here at the house- THAT is 12 years old and still in very good shape.
I taped off some steps on a boat I built and loaded the area with sand- model railroad ballast sand in fact. That was four years ago and the owner is still quite happy with his non skid steps into the cabin.
I used Z-Spar 2015, which is my varnish of choice in our sun, inside and outside
I also have sand (sprinkled) in clear polyurethane on the steps on the captains ladder going to our loft bedroom here at the house- THAT is 12 years old and still in very good shape.
-
- Almost a Finish Carpenter
- Posts: 92
- Joined: Wed Aug 23, 2006 11:11 am
- Location: Battle Creek, Mi
- Contact: