Splicing Nuts
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
Splicing Nuts
Does anyone have any experience with these?
I had never seem them before and I stumbled on to their website by accident while I was looking for some splicing supplies.
I had never seem them before and I stumbled on to their website by accident while I was looking for some splicing supplies.
- Ceasar Choppy
- Boat Obsession Medal Finalist
- Posts: 622
- Joined: Thu Mar 09, 2006 11:05 am
- Location: Port Starboard, MD
My slip neighbor uses them. I'm skeptical, however. My own splices are at least as strong, if not stronger and look a lot sleeker than these. Plus, I have something to do during the week when I'm watching TV. Splicing doesn't intimidate me like it used to-- before I started doing it enough to get some practice!
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
I have been planning all along to splice and whip my own lines but I was just a bit curious when I stumble across these. Actually todays clouds and rain will be just the ticket to get me to order my line and dust off my splicing kit and "refresh" my memory. I always seem to dread the first couple splices but then I get the hang of it.
-
- Rough Carpentry Apprentice
- Posts: 59
- Joined: Wed Feb 07, 2007 2:26 pm
- Location: Gainesville, Fl
I had only spliced three-strand before. I had to put together some new sheets and halyards for the Flying Scot and needed to splice double braid in 1/4" and 5/16".
I used this guy's "professional" method:
http://www.thecoastalpassage.com/pro_splice.html
First one took some work but the second one took only a few minutes and then I was trying to find more splices to make!
The only concern I have is that one leg of the splice only has the cover, no core. In basic double braid polyester the core and the cover each take half the load. In an eye splice each leg takes half the load so having only half the strength on one leg means the splice is only as strong as the line (or somewhat less because of bends and damage to the strands from the splice.) The line has a SWL of something like a thousand pounds and its just used as halyards and sheets on a 19' boat so I'm not worried about the ultimate strength of the splice. The only tools were a role of tape, knife, a piece of stiff wire cut off a tomato cage, and a clamp.
Are people so averse to knots, bends, hitches, and splices that that they really buy those little plastic doo-hickies in the marine catalogs? Seriously any of those methods cost nothing, look good, are well proven, and won't knock you out if a flogging sheet hits your head. Just make the splice it will make you feel like a real sailor.
Dave
I used this guy's "professional" method:
http://www.thecoastalpassage.com/pro_splice.html
First one took some work but the second one took only a few minutes and then I was trying to find more splices to make!
The only concern I have is that one leg of the splice only has the cover, no core. In basic double braid polyester the core and the cover each take half the load. In an eye splice each leg takes half the load so having only half the strength on one leg means the splice is only as strong as the line (or somewhat less because of bends and damage to the strands from the splice.) The line has a SWL of something like a thousand pounds and its just used as halyards and sheets on a 19' boat so I'm not worried about the ultimate strength of the splice. The only tools were a role of tape, knife, a piece of stiff wire cut off a tomato cage, and a clamp.
Are people so averse to knots, bends, hitches, and splices that that they really buy those little plastic doo-hickies in the marine catalogs? Seriously any of those methods cost nothing, look good, are well proven, and won't knock you out if a flogging sheet hits your head. Just make the splice it will make you feel like a real sailor.
Dave
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
I image the answer to your question must be yes or there wouldn't be any market. I completely agree with you view on splicing. I get a satisfied feeling when I see the splices that I made for my boat. That said, I feel that there are some advantage to a fairly streamlined mechanical splice. The first is that as the line near the splice wears out it would be quite easy to cut the line and redo the mechanical fitting. It can be very tough to re-splice old line. I also feel that knots can, in some uses, be a bit bulky and interfere with running lines. Anyway that is why this application piqued my curiosity. Although "knot" enough to change my methods.Are people so averse to knots, bends, hitches, and splices that that they really buy those little plastic doo-hickies in the marine catalogs? Seriously any of those methods cost nothing, look good, are well proven, and won't knock you out if a flogging sheet hits your head. Just make the splice it will make you feel like a real sailor.
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Just because someone invents a product doesn't mean there's a market for it, per se. It does mean someone thought they had a better way and convinced someone to make it (or set that up themselves), but how many "trick" inventions really make it in the end?Bluenose wrote:I image the answer to your question must be yes or there wouldn't be any market.Are people so averse to knots, bends, hitches, and splices that that they really buy those little plastic doo-hickies in the marine catalogs?
Inventions to satisfy humans' inherent laziness will continue to abound, and people will continue to buy them. The late night infomercials ought to support that notion.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
- Ceasar Choppy
- Boat Obsession Medal Finalist
- Posts: 622
- Joined: Thu Mar 09, 2006 11:05 am
- Location: Port Starboard, MD