Free Schafer 1100 6’ Foil Section

Talk about favorite or hated suppliers, recommend good materials or sources, or anything of the same ilk. This is also a good place to suggest unique ideas and innovations you may have come up with.
Post Reply
Benorado
Bottom Sanding Grunt
Posts: 7
Joined: Tue Apr 06, 2021 10:16 am
Boat Name: The Flying Spur
Boat Type: Cape Dory 30C
Location: USA
Contact:

Free Schafer 1100 6’ Foil Section

Post by Benorado »

Local pick up only in southern South Carolina.

It’s a full 6’ section that I do not need, don’t know what else I could use it for and I can’t just send it to recycling without seeing if someone wants it.

Again, not selling, just giving it to someone that wants/needs one.
-Benjamin
Aboard The Flying Spur
CapnK
Site Admin
Posts: 251
Joined: Thu Aug 25, 2005 10:28 am
Location: Winyah Bay, Georgetown SC

Re: Free Schafer 1100 6’ Foil Section

Post by CapnK »

While I don't need the foil, my rigger friend Cap'n Rick in St Augustine may be able to put it to use sooner or later. I'll ask him.

As an aside: Where are you in SC? I'm in Georgetown. Good to know I'm not the only 'old boat appreciator' in SC.... :)
Kurt and Barque, the CrewDog.
Sundance, '71 A-30, #429
Katie Marie, Ariel #422
Melelani, Islander 36 (shoal)

sailFar.net - Small boats, Long distances...
Benorado
Bottom Sanding Grunt
Posts: 7
Joined: Tue Apr 06, 2021 10:16 am
Boat Name: The Flying Spur
Boat Type: Cape Dory 30C
Location: USA
Contact:

Re: Free Schafer 1100 6’ Foil Section

Post by Benorado »

Hey CapnK! I’m a bit south of you, Hilton Head Island.

I’m content keeping it stowed on deck until someone comes to pick it up, so it’s first-come first-serve!

Kindly,
Benjamin
-Benjamin
Aboard The Flying Spur
Post Reply