The Plastic Classic Forum, your free and in-depth resource for information on re/building classic sailboats. ... Be sure to visit / join our sister site at sailFar.net! ... And don't forget to check out Atom's Virtual Home Port! ...

General epoxy questions

This is the place to post your ideas, thoughts, questions and comments as relates to general boatbuilding and reconstruction techniques and procedures (i.e. recoring, epoxy, fiberglass, wood, etc.)
Forum rules
Post Reply
HinduKush
Bottom Paint Application Technician
Posts: 18
Joined: Thu Jun 11, 2020 1:30 pm
Boat Name: Hindukush
Boat Type: Pearson Triton

General epoxy questions

Post by HinduKush »

I am putting water right bulkheads in Pearson Triton. Bought the plywood and will begin cut card templates for plywood cuts. I wanted to get a recommendation of epoxy to use. Weights of glass tape, fabric, if I need any glass strand matt what weight. Never worked with epoxy yet. I live in the deep south so it is hot and humid in summer. Also what type of filler to add to make it thickened. What type of fairing compound for the interior to use before paint. Thank you for any advice you may have.
Top
Post Reply

Return to “Boatbuilding and Repair Techniques”