Search found 5 matches
- Tue Jan 26, 2021 10:26 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Alberg 30 keel crack
- Replies: 4
- Views: 1650
Re: Alberg 30 keel crack
Good to know. Thanks for the information!!
- Sun Jan 24, 2021 7:50 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Alberg 30 keel crack
- Replies: 4
- Views: 1650
Re: Alberg 30 keel crack
I would think moisture or water leaking in around ballast and then freezing would crack the fibreglass way sooner than a grounding or rust pushing it’s way out of there!!Previous owner of #561 drilled holes at lowest point of bilge and down the outside of keel to allow for any moisture to drain if i...
- Mon Sep 14, 2020 3:10 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Two part epoxy primer
- Replies: 0
- Views: 4275
Two part epoxy primer
Will interlux 2 part epoxy primer be sufficient for my hull above the waterline?? Should I use a coat of 2000e barrier coat first? How soon can I cover barrier coat with epoxy primer? Thanks in advance.
- Fri Sep 11, 2020 9:23 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Fairing with thickened epoxy.
- Replies: 2
- Views: 1262
Re: Fairing with thickened epoxy.
Thanks For the info! I have ground her down and added some glass.
- Tue Sep 08, 2020 8:28 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Fairing with thickened epoxy.
- Replies: 2
- Views: 1262
Fairing with thickened epoxy.
I am in the process of fairing The topside of my hull and am curious as to how thick I can put on thickened epoxy before it is unstable?? As mentioned the workmanship on these Alberg 30s wasn’t the best. The front of my bow isn’t even a straight vertical line when looking at it head on so I planned ...