Search found 27 matches
- Thu Jul 18, 2013 12:25 am
- Forum: Classic Sailboats
- Topic: Mystery Cutter (CAUTION: VERY SALTY)
- Replies: 5
- Views: 4198
Re: Mystery Cutter (CAUTION: VERY SALTY)
My guess is a Colin Archer Redingskote/ Atkin hull. Forerunner of Crealock's Westsail 32.
- Thu Jul 04, 2013 11:01 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Triton Structural Question
- Replies: 9
- Views: 4039
Re: Triton Structural Question
Yeah Steve, it sounds like it is going to be plenty strong. But if you get a chance,please post some pictures especially of the chainplate reinforcement at the main bulkhead (for the uppers). I still don't have a clear picture of what I want there, because I don't want to compromise the integrity of...
- Thu Jul 04, 2013 7:11 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Triton Structural Question
- Replies: 9
- Views: 4039
Re: Triton Structural Question
Externals are on my to do list also. I know the boat has done fine without forward lowers for 40 years, but I can see that mast pumping in a stiff wind. That is definitely a lateral stiffener. Considering that those lateral stiffeners are so small, and the Triton hull is so thick, They are probably ...
- Wed Mar 27, 2013 10:45 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Removing a wheel and reinstalling a tiller
- Replies: 14
- Views: 6703
Re: Removing a wheel and reinstalling a tiller
The tiller head does not bolt to the shaft.
You need to buy a bronze keyway.
The tillerhead has a pinch bolt, slide the head over the shaft and keyway and tighten the pinch bolt- that's it.
You need to buy a bronze keyway.
The tillerhead has a pinch bolt, slide the head over the shaft and keyway and tighten the pinch bolt- that's it.
- Sat Dec 15, 2012 9:01 pm
- Forum: Pearson Triton Specifics
- Topic: Triton emblem
- Replies: 6
- Views: 3901
Re: Triton emblem
I am cleaning boat/house. I'll never use them, so anyone who wants them and can put them to good use , let me know, I'll send them to you.
Merry Christmas! Danny
Merry Christmas! Danny
- Mon Dec 03, 2012 8:39 pm
- Forum: Pearson Triton Specifics
- Topic: Strap Location for Haul Out
- Replies: 6
- Views: 3569
Re: Strap Location for Haul Out
When we launched HOKAHEY in the spring. The straps were tied 6' 8" apart and it picked beautifully. The aft strap was just aft of the lead. This is still a very strong point for lifting, and you can block just forward of it on the lead. This puts the aft strap at the aft big portlight, and the ...
- Mon Dec 03, 2012 8:08 pm
- Forum: Pearson Triton Specifics
- Topic: Triton Weight
- Replies: 4
- Views: 3716
Re: Triton Weight
Today we pulled HOKAHEY out of the water. The trailer was weighed empty at 2100 lbs. at Consumers' Fuel in Belfast, Maine. Boat and trailer weighed 10350 lbs., for a boat weight of 8250 lbs. We had a small amount of cruising gear aboard, fuel, but no water. HOKAHEY is hull # 656, built in RI in 1966...
- Tue Jun 05, 2012 12:10 am
- Forum: Questions and Answers
- Topic: Bedding stanchions
- Replies: 10
- Views: 2534
Re: Bedding stanchions
I am in the process of rebedding everything on HOKAHEY with butyl tape. For backing plates the best material are the shims used in heavy construction to shim up precast concrete. They are plastic/ nylon and come in thicknesses up to 3/4". They are easily machined and cut and are indestructible....
- Tue May 15, 2012 9:44 pm
- Forum: Questions and Answers
- Topic: Tips in sanding polyester resin/ paper gumming up
- Replies: 11
- Views: 2636
Re: Tips in sanding polyester resin/ paper gumming up
A product called "Bottom Prep" is used to remove the wax from finishing resin. Sanding just spreads it around and interferes with the topcoat bond.
- Sun May 13, 2012 6:37 am
- Forum: Ramblings
- Topic: Terminology
- Replies: 3
- Views: 2632
Re: Terminology
That is right. Air draft is what you need to know for bridge clearance.
- Thu May 10, 2012 9:29 pm
- Forum: Pearson Triton Specifics
- Topic: Triton emblem
- Replies: 6
- Views: 3901
Triton emblem
For the life of me, I can't figure where these things go.
Maybe on the fender? hahaha
Danny Guiod HOKAHEY #656
Maybe on the fender? hahaha
Danny Guiod HOKAHEY #656
- Sun Feb 05, 2012 3:17 pm
- Forum: Questions and Answers
- Topic: Varnish issues
- Replies: 4
- Views: 890
Re: Varnish issues
I second Le Tonkinois, it is easy to use and is all natural. I love the color of the finish. Do the research before you buy, it is expensive.
- Sun Feb 05, 2012 3:14 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Cleaning Bronze Jib Hanks
- Replies: 12
- Views: 4386
Re: Cleaning Bronze Jib Hanks
I've used muriatic acid to clean hanks, but they were off the sails. After they need to be rinsed in a baking soda solution to neutralize the acid and then rinsed thoroughly with water. You must use eye and skin protection, and be in a well ventilated area!!! It is a worthwhile skill to know how to ...
- Wed Jan 25, 2012 10:13 pm
- Forum: Materials, Sources, and Innovations
- Topic: Ultimate Sole
- Replies: 4
- Views: 3634
Re: Ultimate Sole
Sorry, that's Le Tonkinois, I believe.
- Wed Jan 25, 2012 10:12 pm
- Forum: Materials, Sources, and Innovations
- Topic: Ultimate Sole
- Replies: 4
- Views: 3634
Re: Ultimate Sole
LeTonkiois claims not to be slippery.
- Wed Jan 25, 2012 10:07 pm
- Forum: Boat Photos
- Topic: Boat renderings
- Replies: 8
- Views: 3515
Re: Boat renderings
Beautiful, I like them!
- Mon Jun 06, 2011 7:50 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Broken portlight dogs
- Replies: 19
- Views: 6195
Re: Broken portlight dogs
Didn't someone recently suggest using graphite packing for the stuffing box as a portlight seal? I searched but came up blank.
- Sat Jan 08, 2011 8:13 am
- Forum: Materials, Sources, and Innovations
- Topic: Trailer for a 28' Classic Plastic_Will this work?
- Replies: 6
- Views: 2113
Re: Trailer for a 28' Classic Plastic_Will this work?
JW, just my 2cents. I looked at the link and saw it was constructed of 4" channel. Seems to me that is way too light. Good luck! Dan
- Sun Dec 19, 2010 8:58 am
- Forum: Ramblings
- Topic: Another outstanding bad boat name
- Replies: 111
- Views: 41118
Re: Another outstanding bad boat name
My first attempt to post a picture. Here is a power boat in Belfast harbor that lived up to it's name. It sat on a mooring, neglected for several years until she broke loose in a storm.
- Sat Jul 10, 2010 3:50 pm
- Forum: Classic Sailboats
- Topic: Seen in Belfast, Maine
- Replies: 0
- Views: 1560
- Sat Jul 10, 2010 12:35 pm
- Forum: Sailing and Cruising
- Topic: Help with sightseeing in the Boston to Bar Harbor area
- Replies: 17
- Views: 5447
Re: Help with sightseeing in the Boston to Bar Harbor area
In Portsmouth NH there is a submarine floating in a pond just off the interstate. As I recall it is a self -guided tour for a donation. In Bath visit Maine Maritime Museum just south of Bath Iron Works shipyard. In Searsport there is Penobscot Marine Museum. And visit Captain Tinkhams Emporium nextd...
- Mon Jun 14, 2010 9:48 pm
- Forum: Pearson Triton Specifics
- Topic: Triton bulkheads
- Replies: 2
- Views: 1070
Re: Triton bulkheads
656 does not have the vinyl cord there, but a thin teak molding, which looks nice. I have used that cord at new shelves and I found it at a hardware store sold as AC weatherstripping (white only). Sailrite also sells a similar product (black or white ) #102187, #102188 on P. 152 of their catalog. Ha...
- Fri Apr 23, 2010 5:24 pm
- Forum: Questions and Answers
- Topic: Removing Contact Cement (Maybe?)
- Replies: 4
- Views: 575
Re: Removing Contact Cement (Maybe?)
I've used Clean Strip adhesive remover, it's a mess and you have to wash it off thoroughly.
- Sat Mar 13, 2010 9:10 am
- Forum: Questions and Answers
- Topic: Glueing wood to formica
- Replies: 11
- Views: 1433
Re: Glueing wood to formica
Thanks for all the ideas. I will take some of the Formica I've already stripped of and do some tests with polyurethane glue. Dan
- Wed Mar 03, 2010 12:03 am
- Forum: Questions and Answers
- Topic: Glueing wood to formica
- Replies: 11
- Views: 1433
Re: Glueing wood to formica
What I'm using is 1/4" thick X 4" wide mahogany. I think it's similar to what Britton is doing in cherry.
- Sun Feb 28, 2010 9:05 pm
- Forum: Questions and Answers
- Topic: Glueing wood to formica
- Replies: 11
- Views: 1433
Glueing wood to formica
I am installing solid wood paneling in my Triton.I've taken everything removable into the shop,stripped off the formica and glued on the wood. now I've come to the forward bulkhead and am wondering if there is an alternative. I know I can get the formica off,even though the bond is still tight, but ...
- Fri Feb 05, 2010 10:37 am
- Forum: Questions and Answers
- Topic: Tuning up ye olde bandsaw?
- Replies: 16
- Views: 1598
Re: Tuning up ye olde bandsaw?
Zach,I'm in the process of cutting 1/4" strips 4" wide out of african mahogany. My bandsaw is an inexpensive 10" Craftsman with a 5/8 hp motor. . It's essential that the boards face is planed flat, the saw is dialed in really well and the blade is in good shape. I use a long 4X4 for t...