Search found 188 matches

by galleywench
Fri Nov 25, 2022 11:21 pm
Forum: Boatbuilding and Repair Techniques
Topic: Rhodes 19 chainplate replacement
Replies: 2
Views: 458

Re: Rhodes 19 chainplate replacement

Thanks, I hadn't thought about adding knees or stringers to help stiffen the hull deck joint, but worth considering. I'm going to have to do a little more analysis before I make the call. The good news is that it is officially way too cold to do any epoxy work in New Hampshire until the spring, so I...
by galleywench
Tue Nov 22, 2022 1:19 pm
Forum: Boatbuilding and Repair Techniques
Topic: Rhodes 19 chainplate replacement
Replies: 2
Views: 458

Rhodes 19 chainplate replacement

A very old, beat up 1963 Rhodes 19 followed me home from craigslist a few weeks ago and I've been going through and replacing just about everything. So far I've replaced and installed 8 of 10 transverse ribs that serve as a mounting point for floorboards and to hold the keel on. Pretty straight forw...
by galleywench
Wed Jun 03, 2015 8:01 pm
Forum: Projects
Topic: Bristol 27
Replies: 111
Views: 96998

Re: Bristol 27

Grinding the bottom is just plain awful. I've done a lot pretty bad boat work in my travels and this ranks right up there with the worst. It sure does look nice a purty when you finish up though. Since you have time, break it up into manageable bites.
by galleywench
Mon Apr 06, 2015 12:36 pm
Forum: Projects
Topic: Special Thanks
Replies: 5
Views: 3167

Re: Special Thanks

Awesome job! Congrats.
by galleywench
Mon Apr 06, 2015 12:34 pm
Forum: Projects
Topic: Alberg 30 Boat shed
Replies: 4
Views: 2682

Re: Alberg 30 Boat shed

Looks good, having a dry (or sometimes sun-free) place to work is key to getting the job done right.
by galleywench
Mon Apr 06, 2015 12:30 pm
Forum: Questions and Answers
Topic: Chrome Deplating
Replies: 13
Views: 4963

Re: Chrome Deplating

by galleywench
Thu Aug 07, 2014 10:13 am
Forum: Projects
Topic: She floats!
Replies: 9
Views: 4036

Re: She floats!

Figment wrote:That was a long road, congrats!
Time flies when your having fun ;)
by galleywench
Thu Aug 07, 2014 8:31 am
Forum: Projects
Topic: She floats!
Replies: 9
Views: 4036

She floats!

I know this forum is all but dead, but now that Magic is back in the water, I'm feeling a bit nostalgic for the good old days when there was lots of activity and expert help from all over the country/world. I've met some good friends here who have helped me work through a ton of issues during the co...
by galleywench
Tue Jul 01, 2014 10:17 am
Forum: Questions and Answers
Topic: Trailboards
Replies: 1
Views: 1919

Re: Trailboards

I have this router signmaking template kit: http://www.sears.com/craftsman-sign-pro-router-kit/p-00966581000P?sid=IDx01192011x000001&kpid=00966581000&kispla=00966581000P Basically it's a set of plastic templates (you can pick the font) and a guide bushing that allows the router to follow the...
by galleywench
Tue Jun 17, 2014 9:56 am
Forum: Classic Sailboats
Topic: Tech Dinghy
Replies: 7
Views: 5207

Re: Tech Dinghy

It's been a while since I read the book, but I believe 'Heart of Glass' discusses these dinghies or something similar that Carl Beetle built back in the 50's, I'll have to go back and re-read it.
by galleywench
Wed Jun 04, 2014 10:45 am
Forum: Questions and Answers
Topic: Weeping Crack in Hull/Paint
Replies: 23
Views: 7264

Re: Weeping Crack in Hull/Paint

Excellent. It never even occurred to me to use closed cell foam for projects of that nature. I already have something in mind. Thanks.
by galleywench
Tue Jun 03, 2014 7:36 am
Forum: Questions and Answers
Topic: Weeping Crack in Hull/Paint
Replies: 23
Views: 7264

Re: Weeping Crack in Hull/Paint

I'm curious, is the expanding foam you used something like this product:
http://store.hamiltonmarine.com/browse. ... wKBLnw_wcB
by galleywench
Mon Jun 02, 2014 11:45 am
Forum: Questions and Answers
Topic: Why?
Replies: 8
Views: 3548

Re: Why?

Thanks mainesail. I'll check those forums out.
by galleywench
Fri May 30, 2014 10:38 am
Forum: Questions and Answers
Topic: Why?
Replies: 8
Views: 3548

Re: Why?

It's sad isn't it... This site helped me solve so many problems along the way. I'm always on the lookout for new posts, but haven't seen anything noteworthy of late. I still use the site as a reference because there is a ton of good info in the threads and will post if I have specific questions, but...
by galleywench
Fri Nov 08, 2013 7:10 am
Forum: Boat Shops and Facilities
Topic: I think I may build a Stimson Bow Shed
Replies: 23
Views: 11659

Re: I think I may build a Stimson Bow Shed

I'm sure they will hold fine, as would the ez-stakes, I was just pointing out that you didn't need to spend $15 a stake when you could use cheaper dimensional lumber. I built mine with a 4 foot knee wall which necessitated a more robust footing, hence the 4x4 posts sunk deep. Either way, once built,...
by galleywench
Tue Nov 05, 2013 4:36 pm
Forum: Boat Shops and Facilities
Topic: I think I may build a Stimson Bow Shed
Replies: 23
Views: 11659

Re: I think I may build a Stimson Bow Shed

I just used a post hole digger and sank PT 4x4s into the ground as deep as I could get them (~4 feet). You can get a post hole digger for the price of 2 spikes. Those spikes may work if you don't hit any rocks but the bows will try to push out (especially if you get a snow load), so having a stable ...
by galleywench
Fri Nov 01, 2013 6:38 am
Forum: Questions and Answers
Topic: Back to Tiller Steering
Replies: 5
Views: 2618

Re: Back to Tiller Steering

Thanks MD, Unfortunately I already bought and cut the fiberglass tube from McMaster Carr. I used the same 3" OD 2" ID tubing and now have some rather expensive leftover tubing. I guess if I want to build a cannon I'll be all set. It sounds like your setup was very similar to mine (except f...
by galleywench
Thu Oct 31, 2013 12:14 pm
Forum: Questions and Answers
Topic: Building a rudder
Replies: 0
Views: 4701

Building a rudder

Are there any good guides out there regarding building a rudder traditional style. By traditional, I'm referring to a rudder that uses mahogany (or other suitable lumber) that is glued (or maybe not) and drifted together with bronze rod? I've read up on the NACA foil guidlines (I will be following l...
by galleywench
Tue Oct 29, 2013 7:34 am
Forum: Boat Shops and Facilities
Topic: I think I may build a Stimson Bow Shed
Replies: 23
Views: 11659

Re: I think I may build a Stimson Bow Shed

By the way, JD is having a sale on shrink wrap: 7mil 14'x128'. Free shipping, too. http://www.jamestowndistributors.com/userportal/show_product.do?pid=63161&campaign=email102213 Would this be an appropriate material to wrap the shed in? My initial thought was to get greenhouse film 6mil locally...
by galleywench
Tue Oct 29, 2013 7:23 am
Forum: Boat Shops and Facilities
Topic: I think I may build a Stimson Bow Shed
Replies: 23
Views: 11659

Re: I think I may build a Stimson Bow Shed

Now I gotta buy a torch?! Can you shrink using a heat gun or is that too small? Buy or rent (if you can) a shrink wrap torch/gun, a heat gun would take years (or a lifetime). I thought the tarp was more for moisture prevention.... but I guess ventilation is the better prevention. Ventilation is the...
by galleywench
Mon Oct 28, 2013 11:14 am
Forum: Boatbuilding and Repair Techniques
Topic: A Couple of New....
Replies: 5
Views: 3567

Re: A Couple of New....

Great stuff as always, I've looked to your articles for direction on many occasions (I have a few rolls of your butyl tape for my rebedding projects).
Keep 'em coming.
-matt
by galleywench
Fri Oct 25, 2013 2:34 pm
Forum: Boat Shops and Facilities
Topic: I think I may build a Stimson Bow Shed
Replies: 23
Views: 11659

Re: I think I may build a Stimson Bow Shed

I shrink wrapped my shed with 7 mil white plastic and have had zero issues with it and it is just about 4 years old. At the time I bought the shrink wrap, most of the 7 mil stuff had a 5 year UV warranty. My shed is starting to see signs of aging, but it should have another winter left in it and my ...
by galleywench
Fri Oct 25, 2013 2:22 pm
Forum: Ramblings
Topic: Forum future
Replies: 27
Views: 7693

Re: Forum future

CharlieJ wrote:galleywench- I know the guy who runs this forum. I don't think there's any danger of it being shut down, at least not at this time.
That's good to hear, I'd love to see some more activity though. It takes my mind off my day job ;)
by galleywench
Thu Oct 24, 2013 8:45 am
Forum: Ramblings
Topic: Forum future
Replies: 27
Views: 7693

Re: Forum future

This site has been a huge help for me during the course of my restoration. It is too bad that the number and variety of posts has fallen dramatically; but as pjesus said, I always get my questions answered and I really can't say how much I appreciate that. I would hate to see it shut down because th...
by galleywench
Mon Oct 14, 2013 5:35 pm
Forum: Questions and Answers
Topic: Back to Tiller Steering
Replies: 5
Views: 2618

Re: Back to Tiller Steering

I'm curious... How are you extending the actual rudder shaft itself? (As it was previously cut.) Are you replacing the shaft in its entirety? What is it made of? I will be dropping the rudder and replacing the shaft entirely with a longer one. Edson makes shaft extenders so I could bolt a shaft ext...
by galleywench
Thu Oct 10, 2013 9:29 am
Forum: Questions and Answers
Topic: Back to Tiller Steering
Replies: 5
Views: 2618

Back to Tiller Steering

I'm in the process of converting my Alberg 35 back to tiller steering and have a few questions. The original boat was tiller steered, but was converted sometime in the 80's to pedestal steering. During this conversion, the rudder shaft was cut so it was below the cockpit and a quadrant was fitted to...
by galleywench
Thu Sep 19, 2013 7:22 am
Forum: Materials, Sources, and Innovations
Topic: Taylor Made bimini
Replies: 5
Views: 3534

Re: Taylor Made bimini

Most of the people I know with biminis fold them up when they leave for the weekend, as they mainly use them for afternoon sun protection. I should say that I've never had a bimini, but when my boat was in the water the dodger would stay up all summer. I never thought of biminis as semi-permanent st...
by galleywench
Mon Sep 16, 2013 11:05 pm
Forum: Boatbuilding and Repair Techniques
Topic: Removing a wheel and reinstalling a tiller
Replies: 14
Views: 6469

Re: Removing a wheel and reinstalling a tiller

This should work but is very expensive: http://www.edsonmarine.com/marinestore/ ... &cPath=289

I haven't found anything used, they seem to be few and far between.
by galleywench
Mon Sep 16, 2013 10:15 am
Forum: Boatbuilding and Repair Techniques
Topic: Removing a wheel and reinstalling a tiller
Replies: 14
Views: 6469

Re: Removing a wheel and reinstalling a tiller

I know it's a late response, but I am planning on removing my wheel steering with a tiller as well. I don't think you'll be disappointed, the wheel just isn't needed on boats our size, adds complexity, and you lose the responsive feel of a tiller.
by galleywench
Wed Jul 31, 2013 1:05 pm
Forum: Boatbuilding and Repair Techniques
Topic: Deck Hardware
Replies: 8
Views: 3863

Re: Deck Hardware

I am going through the same thing myself and I'm not really looking forward to putting more holes back in the boat, but ultimately, Figment is correct. A properly trimmed sail is a properly trimmed sail and you need to have the ability to make adjustments to get the most out of your boat (you don't ...
by galleywench
Sun Apr 07, 2013 10:05 pm
Forum: Projects
Topic: The Christina Louise
Replies: 86
Views: 23934

Re: The Christina Louise

Great job, its amazing how the paint makes everything start to come together.
by galleywench
Thu Mar 21, 2013 9:38 am
Forum: Questions and Answers
Topic: New Chainplates
Replies: 8
Views: 3825

Re: New Chainplates

Thanks for the responses. The local machine shop where I am having them drilled had no interest in polishing them mechanically and does not do passivation. He told me that unless I wanted that mechanically polishing them is not worth it for them because of the time involved. In any event, I just got...
by galleywench
Tue Mar 12, 2013 12:52 pm
Forum: Questions and Answers
Topic: New Chainplates
Replies: 8
Views: 3825

New Chainplates

I ordered some .25" 316 flat bar from online metals to make up my new chainplates and I'm going to have holes punched/drilled at a local machine shop, but I've been reading online about passivating and/or polishing them to help prevent corrosion. I understand polishing and I'll get a quote from...
by galleywench
Tue Sep 25, 2012 3:22 pm
Forum: Questions and Answers
Topic: Paint-how to determine what paint was used?
Replies: 3
Views: 1246

Re: Paint-how to determine what paint was used?

I just went through a similar exercise earlier this year on a small part of my deck that had original paint on it. I had planned on using a 2 part paint (Interlux Perfection) and the product literature stated that it shouldn't be applied over an enamel or other 1 part paints. I wasn't sure what the ...
by galleywench
Thu Sep 13, 2012 8:46 pm
Forum: Questions and Answers
Topic: To flatten or not to flatten
Replies: 3
Views: 1301

Re: To flatten or not to flatten

Ok, I'm convinced, the final coat will remain high gloss. I just hope I don't screw it up and have to lay down a fourth coat. It's nerve racking to sand down a good looking finish with the hopes that the next coat will be better, but knowing that there are a whole slew of things that can go wrong al...
by galleywench
Thu Sep 13, 2012 9:36 am
Forum: Questions and Answers
Topic: To flatten or not to flatten
Replies: 3
Views: 1301

To flatten or not to flatten

I am approaching the point in my Alberg 35 recore/restoration where I have to decide whether to add a flattening agent to the final coat on the decks. I've done 2 coats of Interlux Perfection on all the areas that will be exposed (cabin top sides and the deck perimeter/bulwark). I will be using Kiwi...
by galleywench
Fri Aug 10, 2012 7:14 am
Forum: Ramblings
Topic: Hold Fast
Replies: 2
Views: 2192

Re: Hold Fast

Well, so much for getting in to work early to get things done....

Fun stuff!
by galleywench
Mon Aug 06, 2012 8:32 pm
Forum: Materials, Sources, and Innovations
Topic: Paint color
Replies: 5
Views: 4026

Re: Paint color

Sorry, maybe I wasn't clear. I already tinted the kiwigrip, I'm really looking to find out some real world photos of Interlux Perfection in Matterhorn White and Mediterranean White.
by galleywench
Mon Aug 06, 2012 12:09 pm
Forum: Materials, Sources, and Innovations
Topic: Paint color
Replies: 5
Views: 4026

Re: Paint color

I hadn't considered that scenario. Unfortunately I already have my Kiwigrip in hand so that much of a change would be costly.
by galleywench
Mon Aug 06, 2012 8:27 am
Forum: Materials, Sources, and Innovations
Topic: Paint color
Replies: 5
Views: 4026

Paint color

I'm having trouble deciding on my deck paint color; I have it narrowed down to Interlux Perfection Matterhorn White or Mediterranean White and I am having trouble visualizing based on a paint chip on my monitor. I originally thought Matterhorn White but My non-skid (will be Kiwigrip) is going to be ...
by galleywench
Tue Jul 31, 2012 11:06 am
Forum: Ramblings
Topic: Progress
Replies: 24
Views: 9181

Re: Progress

Wow, looks fantastic. She'll turn heads for sure!

Are you still on Lake Monomonac? I haven't heard that name in a long time, I surveyed the lake back in the early 90's.
by galleywench
Tue Jul 31, 2012 6:52 am
Forum: Projects
Topic: Coronado 15 project.
Replies: 389
Views: 217286

Re: Coronado 15 project.

Looks good, but Six10 wouldn't be my choice for your next step. It's expensive, hard to sand, and is primarily used as a structural adhesive or gap filler. I'd go with a standard epoxy mix thickened with Cabosil (for strength) and microballoons (for sandability).
by galleywench
Wed Jul 18, 2012 11:32 am
Forum: Tools and Techniques
Topic: Favorite Odd Tools
Replies: 9
Views: 5911

Re: Favorite Odd Tools

If your going to be cutting a lot of fiberglass cloth (especially biax or heavier), there is no substitute for a pair of 12" Wiss scissors. They aren't cheap but I think they are worth every penny. They cut biaxial cloth like a hot knife through butter. http://www.jamestowndistributors.com/use...
by galleywench
Wed Jul 18, 2012 8:53 am
Forum: Tools and Techniques
Topic: Favorite Odd Tools
Replies: 9
Views: 5911

Re: Favorite Odd Tools

If your going to be cutting a lot of fiberglass cloth (especially biax or heavier), there is no substitute for a pair of 12" Wiss scissors. They aren't cheap but I think they are worth every penny. They cut biaxial cloth like a hot knife through butter. http://www.jamestowndistributors.com/user...
by galleywench
Tue Jul 17, 2012 9:55 pm
Forum: Questions and Answers
Topic: Portlight rebuild
Replies: 13
Views: 2551

Re: Portlight rebuild

Thanks very much, I'd be happy to pay for your time spent as well. Just pm me any details.
by galleywench
Tue Jul 17, 2012 8:14 pm
Forum: Questions and Answers
Topic: Portlight rebuild
Replies: 13
Views: 2551

Re: Portlight rebuild

Tallystick wrote:I only used 25ml for coating the portlights. It's a 4:1 mix resin to catalyst. I use plastic syringes from the grocery store pharmacy to measure small amounts.
Wow, you could repackage the rest of your gallon and sell 150 - 25 ml containers of it for a tidy profit :) Sounds like a new business.
by galleywench
Tue Jul 17, 2012 2:16 pm
Forum: Questions and Answers
Topic: Portlight rebuild
Replies: 13
Views: 2551

Re: Portlight rebuild

Ya the references I found on the interweb made it look like a heavy duty commercial product. Probably holds up better than a rattlecan clear coat, but $200 for a gallon is steep. I'd guess that a gallon goes a long way too. Anyone else looking to do the same in the New England area? Maybe we could d...
by galleywench
Tue Jul 17, 2012 12:49 pm
Forum: Questions and Answers
Topic: Portlight rebuild
Replies: 13
Views: 2551

Re: Portlight rebuild

They look nice. Are you going to clear coat the nice shiny bronze or let a patina develop? For my portlights I clear coated all the bronze with psx-700 except for the exterior facing part of frame that holds the glass, so there will be a small ring of patina around the glass for contrast. I'm not s...
by galleywench
Mon Jul 16, 2012 7:32 pm
Forum: Questions and Answers
Topic: Portlight rebuild
Replies: 13
Views: 2551

Re: Portlight rebuild

Because I am generally lazy when it comes to making things shiny and I like to tinker, I decided to go with electrolytic dechroming (homestyle)...

See my post here:

http://www.alberg35.com/2012/06/fun-wit ... ustic.html
by galleywench
Sun Jul 15, 2012 6:37 pm
Forum: Sails, Rigging, and Systems
Topic: Spreader Lights
Replies: 3
Views: 2563

Re: Spreader Lights

Wow, very nice. Do you have a make/model for those lights, I'd like to give it a go when I get to refurbishing my mast.