Search found 184 matches

by Lloyd
Sat Jan 27, 2024 8:05 pm
Forum: Projects
Topic: Refit and Modifications to a Cape Dory 36
Replies: 19
Views: 2108

Re: Refit and Modifications to a Cape Dory 36

Looks like a lot of nice work.
How did the Monitor vane perform?
I seem to be stuck on my project, not getting anything done on it.
It's good to see other people moving along on their projects.
by Lloyd
Fri Jul 07, 2023 7:55 pm
Forum: Projects
Topic: Introducing Katie-J
Replies: 369
Views: 175522

Re: Introducing Katie-J

That would be a major set back if it had happened to me. Hope you are able to continue with the project.
by Lloyd
Tue Jun 27, 2023 9:15 am
Forum: Projects
Topic: 1964 Alberg 30 Tradewinds
Replies: 9
Views: 1030

Re: 1964 Alberg 30 Tradewinds

Welcome. Yes you found the right spot. I love the Alberg 30. Please post lots of photos of the project. Looking forward to it.
by Lloyd
Wed Jun 21, 2023 11:33 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Next up, rethink and rebuild the dolly.
by Lloyd
Wed Jun 21, 2023 11:31 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

It took some time winching but I got it back on the trailer almost all the way. There was about 6" space between the bow and the bow roller.
IMG_8011.jpg
I strapped her down and headed home. I had to stop three times because the forward strap kept coming off.
But I made it home.
by Lloyd
Wed Jun 21, 2023 11:27 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I then tried winching the boat up onto the trailer. I wouldn't slide much. I backed the truck up some more, then winched it up some more.
IMG_8005.jpg
by Lloyd
Wed Jun 21, 2023 11:24 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I then cranked the jack wheel down to lift the dolly upright then slowly continued to pull the trailer out of the water.
IMG_7977.jpg
IMG_7977.jpg (132.95 KiB) Viewed 1292 times
I blocked the wheels and took the extension tube out. I then attached the trailer back to the truck with no extension.
by Lloyd
Wed Jun 21, 2023 11:20 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Here is what happened. The dolly leaned over, for what ever reason, and the rubber tire was knocked off the rim. As I pulled the trailer out of the water, with the dolly leaning over, the trailer was heading over towards the concrete dock. So i stopped it here.
IMG_7974.jpg
by Lloyd
Wed Jun 21, 2023 11:11 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

First time floating in a long time. I am happy.
IMG_7972.jpg
I took the boat for a five minute ride then back to the trailer.
IMG_7989.jpg
by Lloyd
Wed Jun 21, 2023 10:57 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

This is where I had a problem. Notice the brackets of the dolly. They are leaning over. IMG_7949.jpg I went ahead and continued to back the trailer in with the dolly leaning over. Second problem. The trailer tires are about at the end of the concrete ramp and I needed a little more to float it off. ...
by Lloyd
Sun Jun 18, 2023 2:14 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Then it was off to the boat ramp. Here the trailer is blocked and unhooked from the truck. I am untying the extension tubes. I had decided not to raise the mast. I just wanted to make sure I could get the boat off then back on to the trailer. IMG_4442.JPG The extension tubes hooked up and ready for ...
by Lloyd
Sun Jun 18, 2023 12:19 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Here is a picture of the jib I sewed hoisted while the boat was on the trailer. IMG_4421.JPG I then dropped the mast using the A-frame with a block and tackle. IMG_4433.JPG This picture shows the mast down resting in the aft mast crutch. IMG_4434.JPG And finally the mast is moved forward and tied do...
by Lloyd
Sat Jun 03, 2023 9:56 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Glued pieces of carpet on the splice areas and pieces on the tail end of the boards. IMG_4412.JPG Then I got them installed. IMG_4415.JPG IMG_4419.JPG IMG_4420.JPG I now need to figure out how to deal with the extension tubes. Thinking about putting two blocks of wood on two cross beams and tie them...
by Lloyd
Fri Jun 02, 2023 9:55 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

So I had a problem getting the 2 x 4 bunk boards on. I glued carpet on the tops of the bunk boards then started to install them. I was only able to lag screw the boards to the back three uprights brackets. The back three basically line up straight. I couldn't twist the front ends of the boards in en...
by Lloyd
Fri Jun 02, 2023 8:48 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

The extension launching tube, I got it all bolted together and the dolly bracket, with wheels, mounted. IMG_4375.JPG IMG_4378.JPG I then stuck them on the trailer. I still have to figure out how to haul them. On the trailer or in the back of the truck. IMG_4403.JPG I am not to sure how well this sys...
by Lloyd
Fri Jun 02, 2023 8:27 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

So then I continued to tighten up the nuts to lift the boat off the keel board. IMG_4360.JPG I marked the keel board for the brackets and bolt holes. Then pulled it out. The boat is now only resting on the uprights. I then drilled the holes. IMG_4362.JPG I then slid the keel board back into place, b...
by Lloyd
Thu Jun 01, 2023 8:42 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I them went back around and put in the threaded rod with the nuts and top brackets. IMG_4350.JPG I then got the wench assembly/ladder bolted on the front. IMG_4343.JPG IMG_4345.JPG IMG_4346.JPG This boat never had a bow eye. So it was time to install one so the wench had someplace to hook to. IMG_44...
by Lloyd
Thu Jun 01, 2023 1:46 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

So I am now up to my big news. I took the new trailer parts to be galvanized. Then went back a week later to pick them up. Now I have most of them installed but not with out some problems. The first problem was with the threaded rods and nuts. I had told the place I bought them from that I was going...
by Lloyd
Thu Jun 01, 2023 9:00 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Atomvoyager i decided to try the board on the swing out arm because I hate to cut holes in the boat for things that may not last or need to be replaced with something else. I hope it works out. I sewed up a cover for the Port combing board. I am still working on the Starboard one. IMG_4393.JPG Talk ...
by Lloyd
Wed May 31, 2023 9:03 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I had to make new blocks for the new navigation lights. I made them out of wood, coated them with epoxy and painted them with house paint.
IMG_4332.JPG
Here they are installed.
Port side.
IMG_4353.JPG
IMG_4354.JPG
And Starboard side.
IMG_4351.JPG
IMG_4352.JPG
by Lloyd
Wed May 31, 2023 6:45 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Here is the cleat epoxied in the hole in the V-berth and painted. IMG_4384.JPG The cover I made for it. IMG_4330.JPG And the cover in place. IMG_4383.JPG I built a box for the electric on/off switch, a three position breaker panel, a bilge pump switch and a charging port. IMG_4386.JPG And above it i...
by Lloyd
Tue May 30, 2023 8:40 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

The line drawing is for a jib kit I bought from Sailrite. I sewed it up this past winter.
by Lloyd
Tue May 30, 2023 8:35 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Posting some work I have been doing. I built up a wood base for a battery. I got it all coated with epoxy. IMG_4304.JPG This is where I am going to put the battery. Just aft of the V-berth bulkhead. IMG_4309.JPG I set the base in with thickened epoxy and tabbed over both ends. IMG_4314.JPG I bought ...
by Lloyd
Thu Feb 16, 2023 7:18 pm
Forum: Projects
Topic: Atom 6.5 Divinycell
Replies: 27
Views: 2884

Re: Atom 6.5 Divinycell

Turned out to be a nice looking dinghy. Saw your other post where you are out and about cruising with it. Love it.
by Lloyd
Sun Oct 09, 2022 7:13 pm
Forum: Projects
Topic: Introducing Katie-J
Replies: 369
Views: 175522

Re: Introducing Katie-J

You are getting very creative with all of this fiberglass work. Things are looking good!
by Lloyd
Sun Oct 02, 2022 10:32 pm
Forum: Boatbuilding and Repair Techniques
Topic: Bristol 24 - repairing the arch under the deck stepped mast
Replies: 7
Views: 819

Re: Bristol 24 - repairing the arch under the deck stepped mast

Have you got any pictures so we can see what is going on? I built up a new mast beam for my Bristol 27 with a new bulkhead under it but never restepped the mast. So I can’t say how will it worked yet.
by Lloyd
Sun Sep 11, 2022 10:12 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I pulled the boat around to the other end of the barn. I got the mast down and out of the barn and on top of the boat. Pulled it back around the barn to the working end. South Coast Mast Down.jpg I put together some blocks, for the front, and two crutches for the back. One on the aft end and one tha...
by Lloyd
Sat Sep 10, 2022 10:41 pm
Forum: Projects
Topic: Atom 6.5 Divinycell
Replies: 27
Views: 2884

Re: Atom 6.5 Divinycell

She is looking really good. Did you ever put her on a scale and come up with a weight? Eventually I will have to come up with a very small dinghy for my Bristol 27.
by Lloyd
Sun Aug 21, 2022 4:28 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More trailer work. I took all of the bolts out of the spring and rocker arm attachment points. I cleaned all the bolts and holes and put them back in. I had to add two bushings, on one of the rocker arms, that were missing. spring-rocker arm.jpeg The new tires came in. I got all four mounted, then p...
by Lloyd
Sun Aug 07, 2022 6:08 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More trailer work. I got the old wheels off the trailer. I took the tires off the rims so I could sand and paint them. Here is the front and backside of one of the rims before sanding. IMG_4286.JPG IMG_4288.JPG I sanded them as best as I could then primed and painted them all. One thick coat of prim...
by Lloyd
Sun Jul 17, 2022 4:16 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More trailer work. I built an upright frame to hold the wench. IMG_4274.JPG The bottom of which will sit on the main trailer frame tube. IMG_4275.JPG A bolt will clamp the angles to the frame tube. IMG_4276.JPG The angle uprights, holding the wench, have two braces bolted to them at the top and the ...
by Lloyd
Sun Jul 17, 2022 4:06 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Converting a power boat trailer into a sailboat trailer. I have gotten all the uprights and braces made for the trailer. This is a back corner one. IMG_4268.JPG I welded two ears to the upright tube for the two braces to bolt to. IMG_4269.JPG I welded an angle to the bottom of the tube to bolt to th...
by Lloyd
Sat Jul 16, 2022 9:25 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

The deck, cabin top and cockpit areas were primed with AwlGrip 545 epoxy primer then painted with AwlGrip top coat. I rolled it on. The first coat laid out nicely but the second coat ended up with bubbles, I did not tip it. It looks good but a little rough. I used Kiwi Grip for the nonskid. The Kiwi...
by Lloyd
Sat Jul 02, 2022 6:35 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Still repairing the combing boards. Filling with epoxy. IMG_4168.JPG Sanding old varnish off two interior trim pieces, getting them ready for new varnish. IMG_4170.JPG I cut new companionway trim out of PVC board stock, the old wood was to far gone to reuse. IMG_4173.JPG IMG_4177.JPG The starboard a...
by Lloyd
Sat Jul 02, 2022 6:21 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More pictures of work done in 2021. The three hatch boards, building up epoxy to fill the lost grain and smoothing the boards up. IMG_4156.JPG I pulled the worn out bushings on the rudder shaft and fit in new bronze ones, top and bottom. I still have to pull the bottom one back out and epoxy it back...
by Lloyd
Thu Mar 17, 2022 8:43 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More combing boards work. This picture is comparing the two boards. The one on the left has several coats of epoxy on it . The one on the right hasn't had anything done to it yet. IMG_4131.JPG This shows where a piece had broken off over thirty years ago on one of them. IMG_4133.JPG Combing board af...
by Lloyd
Wed Mar 16, 2022 9:26 am
Forum: Questions and Answers
Topic: Washing awlgrip hull paint
Replies: 4
Views: 936

Re: Washing awlgrip hull paint

I have just used Dawn on my Awlgrip paint. Long term who knows.
by Lloyd
Tue Mar 15, 2022 2:12 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Here is the end of one of the combing blocks after sanding out the rot. IMG_4129.JPG And the other block after a coat of epoxy. IMG_4124.JPG The hatch board, with the vent in it, before taking it apart and sanding it. IMG_4125.JPG Hatch board with several coats of epoxy on it. IMG_4136.JPG Hatch boa...
by Lloyd
Mon Mar 14, 2022 5:26 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I put some filler on the rub rail end caps, to be sanded out, so I can paint them. IMG_4103.JPG I also started to put hardware back on. I started with one of the Genoa tracks on the starboard side. Using butyl tape to seal the bolts. IMG_4113.JPG IMG_4112.JPG Showing the bolts on the underside of th...
by Lloyd
Mon Mar 14, 2022 1:49 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Next up was the nonskid taping and painting. Deck taped off for nonskid. IMG_3982.JPG Two cockpit hatches taped off. IMG_3983.JPG And a close up of a cockpit hatch. IMG_3987.JPG And a picture of the aft deck taping. IMG_3994.JPG And the cockpit area. IMG_3997.JPG The nonskid on the aft deck. IMG_399...
by Lloyd
Mon Mar 14, 2022 10:10 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

I think the picture in the last post of the cockpit locker lids actually were of them painted. The painted areas. First the foredeck. IMG_3970.JPG And the aft deck. IMG_3972.JPG And the cockpit area. IMG_3974.JPG And the cabin top. IMG_3980.JPG And finally the motor mount block. IMG_3969.JPG I let a...
by Lloyd
Mon Mar 14, 2022 10:04 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More work done in May 2021.
I got the deck taped off for painting.
The foredeck looking aft.
IMG_3962.JPG
And the cockpit area.
IMG_3963.JPG
And the aft deck.
IMG_3965.JPG
And the cockpit locker lids.
IMG_3967.JPG
by Lloyd
Sun Mar 13, 2022 12:02 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More work from May 2021. Working on the chain plate blocks. I drilled out all the old screw holes. IMG_4074.JPG I filled the holes with thickened epoxy. I did all four chain plate blocks the same way. IMG_4080.JPG On the back stay chain plate block I filled the old holes with thickened epoxy then pu...
by Lloyd
Sun Mar 13, 2022 11:52 am
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

It's been awhile since I posted anything so here is some work I did back in May 2021. This first picture is how I held up the biaxial cloth I put up on the inside of the cabin ceiling. IMG_4049.JPG Epoxying in a new mast beam. IMG_4054.JPG Close up of the port end of the new mast beam. IMG_4058.JPG ...
by Lloyd
Tue Sep 14, 2021 11:03 am
Forum: Projects
Topic: Allied Seawind 30 Integral Water Tank Build
Replies: 27
Views: 3326

Re: Allied Seawind 30 Integral Water Tank Build

Big project. Baffle jig looks really good. Holds them good while allowing plenty of room to work around.
by Lloyd
Fri Jul 02, 2021 9:30 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

More work done. I cut out a mini bulkhead. It goes under the aft end of the bunks/seats. The raised center part goes under the forward end of the cockpit. IMG_3139.JPG And here it is installed. IMG_3299.JPG I also added a mini bulkhead under the center of the cockpit. It's epoxied in with fillets. T...
by Lloyd
Sun Jun 27, 2021 11:13 pm
Forum: Projects
Topic: South Coast 21
Replies: 73
Views: 9671

Re: South Coast 21

Time to post some updates for my South Coast 21. This work was done August 2018. All of the new core in the cabin top is in, sanded, and faired ready for glass. IMG_3081.JPG Epoxying in new PVC pipe as stringers. This is looking forward. IMG_3086.JPG And looking aft. IMG_3088.JPG And with two layers...
by Lloyd
Sat Sep 19, 2020 3:33 pm
Forum: Projects
Topic: Introducing Katie-J
Replies: 369
Views: 175522

Re: Introducing Katie-J

I like her lines also. Never seen one before.
Sounds like your projects will not interfere with your plans to use her for day sailing.
A couple questions.
Whats her length, beam, draft and displacement?
And what does her keel look like?
Looks like she might be a sweet sailing boat.
by Lloyd
Mon Aug 17, 2020 9:52 pm
Forum: Projects
Topic: Bristol 27
Replies: 111
Views: 96997

Re: Bristol 27

Some more pictures of the work I have been doing. This first one is of a fiberglass box I am making for the new engine control panel to be mounted in.. It's all clamped up with two layers of cloth, one of 6oz cloth and a second of biaxial cloth. IMG_3843.JPG Then all the clamps off, another layer of...
by Lloyd
Wed Aug 05, 2020 9:21 pm
Forum: Projects
Topic: Bristol 27
Replies: 111
Views: 96997

Re: Bristol 27

The muffler sitting in place. You can see the exhaust on the right. IMG_3818.JPG In this photo you can see the height difference between the two. The muffler inlet is suppose to be twelve inches away from the exhaust elbow. I just have that much distance. The water injection point is suppose to be s...