Hi Tim,
Can you describe what the layers are that you can see quite well in this photo:
.
Is the deepest layer fiberglass?
Thanks so much. This project diary (and others) are quite helpful as I work on mine.
cheers,
chuck.
Iota Project
- mobilchuckje
- Almost a Finish Carpenter
- Posts: 81
- Joined: Sat Oct 10, 2009 12:20 pm
- Boat Name: TOFU
- Boat Type: Islander 21
- Location: Port Townsend, WA
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Re: Iota Project
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
- mobilchuckje
- Almost a Finish Carpenter
- Posts: 81
- Joined: Sat Oct 10, 2009 12:20 pm
- Boat Name: TOFU
- Boat Type: Islander 21
- Location: Port Townsend, WA
Re: Iota Project
Thank you kindly.
So hardware fastener holes you knew you would reuse you passed over and only filled small holes that wouldn't be reused (eg dodger fasteners-filled stanchion bases-not filled) ?
It appears the deck I'm working on is solid glass, non-cored.
thanks again,
chuck.
So hardware fastener holes you knew you would reuse you passed over and only filled small holes that wouldn't be reused (eg dodger fasteners-filled stanchion bases-not filled) ?
It appears the deck I'm working on is solid glass, non-cored.
thanks again,
chuck.