Engine panel lexan cover

Ask a question...get an answer (or two).
Post Reply
cdawgs65
Deck Grunge Scrubber
Posts: 46
Joined: Thu Jul 05, 2007 8:13 am
Boat Name: Ring
Boat Type: Pearson Triton 559
Location: Pembroke Mass.
Contact:

Engine panel lexan cover

Post by cdawgs65 »

Anybody have any idea of a company or a person who would make up a Lexan cover for my engine panel in the cockpit. Does not have to be water tight just for protecting the ignition and blower switch. I did find a company that sells panel visors for Yanmar engine panels but will not fit my panel, great looking though! Any help would be appreciated.
Rob
Bottom Sanding Grunt
Posts: 3
Joined: Fri Mar 04, 2011 12:26 am
Boat Name: Rayna
Boat Type: Alberg30

Re: Engine panel lexan cover

Post by Rob »

http://www.altecplastics.com/
In Boston, they can make make it with a faxed drawing, cardboard/paper template, etc... Give them a call and tell them what you need. They also have a large scrap pile if you want to make your own.
Carl-A259
Master Varnisher
Posts: 104
Joined: Fri Jan 15, 2010 3:07 am
Boat Name: Romper
Boat Type: Pearson Triton hull705
Location: Georgia

Re: Engine panel lexan cover

Post by Carl-A259 »

Will it be a flat panel type of Lexan cover? If so go to any glass shop with the dimensions and they can cut one for you. Or have a few made, they don't look very clear forever. Or try Home depot, Lowes, etc,
Post Reply