Re: Redundant 1x19 Question…
Posted: Mon Sep 21, 2009 10:24 pm
Glenn,
Not a guy, but... ;)
Are you measuring your wire rope across the flats or across the "rounds"? It's customarily measured across the "rounds," which would give a slightly larger diameter than going across the flats, so that's why I'm asking.
This shows what I mean, down at the bottom:
Rachel
Not a guy, but... ;)
Are you measuring your wire rope across the flats or across the "rounds"? It's customarily measured across the "rounds," which would give a slightly larger diameter than going across the flats, so that's why I'm asking.
This shows what I mean, down at the bottom:
Rachel