This is a very nice engine panel installation (Thanks Nathan!)
I would like to copy the design (from Dasein... hehe) more or less. What I am wondering is... how well is the varnish holding up on the interior where the actual instruments are mounted?
I don't have a fancy panel, just lots of individual guages, and I am worried that I will be removing the guages every year to touch up the varnish. My option is a painted back panel or colored plastic or something to mimic the standard Yanmar panel that Nathan has.
Varnishing the frame every year is okay with me, I just don't want to have to disassemble the thing too.
-Britton
Maintaining varnished engine panels.
-
- Boateg
- Posts: 1637
- Joined: Thu Apr 03, 2003 9:09 am
- Boat Name: Dasein
- Boat Type: Pearson Triton 668
- Location: Portland, Maine
- Contact:
It seems to be holding up quite nicely. It's a vertical surface, down in the cockpit well, with a piece of lexan over it. (Is lexan a UV retardant at all?). I actually don't think I'll need to touch up the exterior of it this year. Probably an every other year sort of thing.
Nathan
dasein668.com
dasein668.com
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
That area gets little UV exposure, and the I have found the varnish holds up extremely well. It probably would only need a touch up coat every few years, so I wouldn't worry about the difficulty. And even then, we're talking mostly about the outer frame; the inner portion would last even longer. Or you could certainly paint that part if you preferred, though a paint finish would also require some maintenance.
I am pretty sure that mine will go another couple years before it needs any more varnish. That's after 2 seasons' use already.
I am pretty sure that mine will go another couple years before it needs any more varnish. That's after 2 seasons' use already.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Candidate for Boat-Obsession Medal
- Posts: 388
- Joined: Fri Mar 03, 2006 7:28 am
- Boat Name: Coquine
- Boat Type: Cape Dory 27
- Location: Montréal
- Contact:
Here's another solution a friend of mine (who had an extra portlight) came up with. It's more "utilitarian", but very solid, practical, and low-maintenance? You could use a bronze one if you wanted to up the aesthetics a bit, I guess.
Last edited by Duncan on Thu Mar 30, 2006 8:47 am, edited 1 time in total.
Cape Dory 10 & 27
-
- Boateg
- Posts: 1637
- Joined: Thu Apr 03, 2003 9:09 am
- Boat Name: Dasein
- Boat Type: Pearson Triton 668
- Location: Portland, Maine
- Contact:
If ou wanted black, I'd just go with black starboard or other plastic. It might fade, but no more than the plastic bevels on the instruments themselves, I wouldn't think.
Nathan
dasein668.com
dasein668.com