tiller head fitting

Talk about favorite or hated suppliers, recommend good materials or sources, or anything of the same ilk. This is also a good place to suggest unique ideas and innovations you may have come up with.
Post Reply
Osprey
Bottom Paint Application Technician
Posts: 17
Joined: Sun Dec 27, 2009 12:44 pm
Boat Name: Osprey
Boat Type: Pearson Triton

tiller head fitting

Post by Osprey »

I need to replace a broken tiller head fitting on a Pearson Triton if anyone has a good source for one please advise. Thank you!
Pearson Triton # 624-"Osprey"
jollyboat
Candidate for Boat-Obsession Medal
Posts: 338
Joined: Wed Mar 29, 2006 11:51 am
Boat Name: Jollyboat
Boat Type: Pearson Triton
Location: Fairfield County, CT
Contact:

Re: tiller head fitting

Post by jollyboat »

Edson Tiller Head Fitting - Bronze - 1" Bore - 1/4" Key
[eds965BR100] $245.70



Click to enlarge
Edson’s Bronze Tiller Head Fittings are hand cast in Edson’s own foundry and have a classic look and feel that compliments both traditional and modern boats alike. Two sizes for rudderposts 1” dia or 1¼”to 1½” dia. They are available in burnished bronze or chrome plated bronze.

http://www.p2marine.com/catalog/product ... s_id=30478
Brian
Jollyboat, Triton #466
Sepi,Triton #346 (1st, Triton)

No Quarter
Post Reply