Need halyards, sheets, rope, cord?

Talk about favorite or hated suppliers, recommend good materials or sources, or anything of the same ilk. This is also a good place to suggest unique ideas and innovations you may have come up with.

Need halyards, sheets, rope, cord?

Postby Richincident » Sun Jun 05, 2011 8:42 am

Last week my jib was stolen, and I am still whining about it. Not only that, but whoever did it took the sheets, which were attached to it.

I am not taking that well. I trotted over to West Marine, which I rarely do, but my local boat shops were closed for the day and I wanted to sail on Sunday.

They asked a cool $1.86 per foot for the NER Stayset that I needed for my sheets. I figured I needed two 40' lines for the job. OUCH.

Frank T. Laski (http://www.theropedope.com/sail_braid.htm) to the rescue. He charged me .78 for the 9/16ths line (same stuff), and only .68 for the 1/2" line. I went for the heavier line. For $1.50 each, he whips the ends.

Can't recommend Frank enough. He is FAST, inexpensive, and fun to deal with by phone or email.
Richard McManus

1967 Soverel 28 #82
THE INCIDENT
User avatar
Richincident
Master Varnisher
 
Posts: 119
Joined: Sun Nov 23, 2008 5:01 pm
Location: Hingham, MA

Re: Need halyards, sheets, rope, cord?

Postby Northstar » Sun Jun 05, 2011 11:30 am

deleted
Last edited by Northstar on Wed Oct 02, 2013 12:37 am, edited 1 time in total.
Northstar
Skilled Systems Installer
 
Posts: 238
Joined: Sun Oct 26, 2008 7:38 pm

Re: Need halyards, sheets, rope, cord?

Postby Richincident » Sun Jun 05, 2011 11:34 am

Same line quality, size, manufacturer. GREAT person to deal with!
Richard McManus

1967 Soverel 28 #82
THE INCIDENT
User avatar
Richincident
Master Varnisher
 
Posts: 119
Joined: Sun Nov 23, 2008 5:01 pm
Location: Hingham, MA

Re: Need halyards, sheets, rope, cord?

Postby ILikeRust » Sun Jun 05, 2011 1:36 pm

I have found the same to be true with just about any supplies or materials. You can find pretty much anything you can get at West Marine elsewhere significantly cheaper - it's just a matter of searching for it on the Internet and waiting for it to be shipped to you.

I always figure if I buy something from West, I'm paying for the convenience of being able to walk into the store and take it home with me right then. But if I have a little time to wait, I'll usually let Google be my friend and find the same thing elsewhere for less.
Bill T.
Richmond, VA

"All men dream: but not equally. Those who dream by night in the dusty recesses of their minds wake in the day to find that it was vanity: but the dreamers of the day are dangerous men, for they may act their dreams with open eyes, to make it possible." - T E Lawrence
ILikeRust
Skilled Systems Installer
 
Posts: 299
Joined: Tue Oct 19, 2010 8:22 pm
Location: Richmond, VA
Boat Name: Grizabella
Boat Type: Pearson Wanderer 30

Re: Need halyards, sheets, rope, cord?

Postby hebert01 » Sun Jun 05, 2011 2:22 pm

Another great source for rope and cordage of ALL types is R&W Rope in New Bedford. http://rwrope.com

Some of their rope products are available directly online, while others require that you call them for a quote. But they're super helpful on the phone, their prices are always great, and their selection is tough to beat. They also carry lots of fantastic traditional marine hardware, like Davey bronze stuff, Meissner winches, etc.

Another resource worth consideration. They're one of those places when every time I need something special or odd, they seem to have a way to get it.
Ed Hebert
ALLEGRA - Ensign #998
User avatar
hebert01
Almost a Finish Carpenter
 
Posts: 96
Joined: Wed Sep 07, 2005 2:04 pm
Location: Mattapoisett, MA
Boat Name: Allegra
Boat Type: Pearson Ensign

Re: Need halyards, sheets, rope, cord?

Postby Rachel » Sun Jun 05, 2011 5:23 pm

Northstar wrote:Nice source!

Within your comment "(same stuff)"...were you referring to size or NER as the line manufacture?

I was wondering the same thing. It sounds like Rich got NER line from this seller but the website linked to seems to show they sell "Atlantic Braids"
http://www.theropedope.com/products.htm

We are an Atlantic Braids distributor offering custom braided lines to size and color. Premium grade Nylon and Polyester Yacht braids of the best craftsmanship, for docking and sail.

Richincident wrote:Same line quality, size, manufacturer. GREAT person to deal with!
User avatar
Rachel
Master of the Arcane
 
Posts: 3192
Joined: Tue Dec 07, 2004 7:59 pm

Re: Need halyards, sheets, rope, cord?

Postby Richincident » Sun Jun 05, 2011 10:31 pm

OUCH!

I think my first purchase from Frank was NER. So I just assumed he was STILL selling their products.

My bad. Should definitely read the website better. THANKS for pointing that out Rachel!

Richard
Richard McManus

1967 Soverel 28 #82
THE INCIDENT
User avatar
Richincident
Master Varnisher
 
Posts: 119
Joined: Sun Nov 23, 2008 5:01 pm
Location: Hingham, MA

Re: Need halyards, sheets, rope, cord?

Postby Chesapeake Bob » Wed Oct 05, 2011 7:19 pm

Much of NER is now made in China anyway. I am sure the Rope Dope will do a fine job for you!

Chesapeake Bob
Cape Dory 30 #335
sv "Aloha Spirit"
Chesapeake Bob
Deck Grunge Scrubber
 
Posts: 29
Joined: Tue Jul 28, 2009 8:56 am
Boat Name: Aloha Spirit
Boat Type: Cape Dory 30

Re: Need halyards, sheets, rope, cord?

Postby Crazer » Wed Oct 05, 2011 9:28 pm

hebert01 wrote:Another great source for rope and cordage of ALL types is R&W Rope in New Bedford. http://rwrope.com

Some of their rope products are available directly online, while others require that you call them for a quote. But they're super helpful on the phone, their prices are always great, and their selection is tough to beat. They also carry lots of fantastic traditional marine hardware, like Davey bronze stuff, Meissner winches, etc.

Another resource worth consideration. They're one of those places when every time I need something special or odd, they seem to have a way to get it.


I'll have to remember that. My boat is in Mattapoisett and all sailing will be done out of New Bedford until we sail for the Chesapeake. We'll be buying a lot of stuff (including, probably, new winches) and preparing the boat for the move.
As eccentric as my boat.
Crazer
Master Varnisher
 
Posts: 122
Joined: Sun Sep 18, 2011 3:07 pm
Location: Ithaca, NY
Boat Name: Loon
Boat Type: Pearson Wanderer

Re: Need halyards, sheets, rope, cord?

Postby Skipper599 » Mon Aug 17, 2015 2:47 am

For those Canadians in western Canada who might be interested, I recently found an industrial rigging supplier in Langley, B.C. who handles double braided marine line products. I was searching for 7/16" ... apparently an odd-ball size ... for my sheets and was told by two different marine stores it was just not available however, WESCO INDUSTRIES had a reel of Polyester Double Braid XLE 7/16" available on the shelf at C$0.748/ft ... I purchased 135' for a total of C$100.98 ... such a deal! ... I was expecting more like $200 at the marine store.
Wesco Industries has branches in Langley, Burnaby, Kelowna and the USA ... but it doesn't say where in the USA
I am: Bob of Wight.

s/v 'Ros Na Cosquin'
a 'Passage - 24'

There are good ships, there are wood ships, and these ships sail the sea

But the best ship, is friendship and may this always be! ... ... ... A prayer from Ireland.
Skipper599
Candidate for Boat-Obsession Medal
 
Posts: 308
Joined: Mon Mar 16, 2009 1:48 am
Location: Cloverdale in Beautiful BC Canada.
Boat Name: "MACUSHLA"
Boat Type: Passage 24-30 Cutter


Return to Materials, Sources, and Innovations



Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest

cron