Hey Tim,
What is your source for those foamy sanding blocks you were raving about? I just realized I am going to need one soon.
-Britton
Those foamy sanding blocks
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
What we're talking about here is the 2-3/4" x 5" soft hand sanding block by 3M. I just used one of these for hand-sanding the Alexseal primer on hull and deck and wonder how I got along without it all this time.
You can get these at Jamestown Distributors, among others, for $13.00.
3M Soft Hand Sanding Block
There is also a firm version with the same shape. Both use the standard Stikit sandpaper rolls.
You can get these at Jamestown Distributors, among others, for $13.00.
3M Soft Hand Sanding Block
There is also a firm version with the same shape. Both use the standard Stikit sandpaper rolls.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Boateg
- Posts: 1637
- Joined: Thu Apr 03, 2003 9:09 am
- Boat Name: Dasein
- Boat Type: Pearson Triton 668
- Location: Portland, Maine
- Contact:
If you ever do any hand sanding, then run, don't walk, to your nearest distrubuter and get this set up.
Nathan
dasein668.com
dasein668.com