Yes I did a search, didn't find a dedicated thread.
Is there a weapon of choice? What to look for? How much to spend at a minimum to rise above the "useless tool" level.
Any help would be appreciated.....
Oh yes, I'll be "aiming" it at a approximately 3/8 total thickness balsa cored fiberglass hull. (Floats of my tri pictured at left.....)
Gots to delineate the wet spots.
Moisture Meter......
-
- Candidate for Boat-Obsession Medal
- Posts: 320
- Joined: Thu Aug 16, 2007 6:54 pm
- Boat Name: Lady Kay IV
- Boat Type: 1990 Dragonfly 25
- Location: Bethlehem, PA
- Contact:
Moisture Meter......
Out there, alone, there is only truth.
I picked up a CT33 after finding a good review online.
Here's an example, http://www.noahsboatbuilding.com/noahus ... 33&eq=&Tp=
Money well spent. I've been boat shopping and it's been invaluable.
Here's an example, http://www.noahsboatbuilding.com/noahus ... 33&eq=&Tp=
Money well spent. I've been boat shopping and it's been invaluable.
-
- Skilled Systems Installer
- Posts: 243
- Joined: Fri Feb 24, 2006 10:47 am
- Location: Casco Bay
- Contact:
If you're interested
If you're interested in a moisture meter read the piece I wrote on the CT-33 by ElectroPhysics. Just used it again today!!
http://www.pbase.com/mainecruising/moisture_meter
http://www.pbase.com/mainecruising/moisture_meter