Free Triton, and boat stands in Maryland
-
- Skilled Systems Installer
- Posts: 176
- Joined: Tue Apr 05, 2005 1:45 pm
- Boat Name: AllAboutMe
- Boat Type: Columbia 8.7
- Location: Richmond,Va
- Contact:
Free Triton, and boat stands in Maryland
Found this website, free Triton in Maryland. Thought I'd pass it along. May or not still be available, but it was just posted.
http://blog.oldragbaggersonline.com/
Larry Wilson
Richmond,Va.
http://blog.oldragbaggersonline.com/
Larry Wilson
Richmond,Va.
Larry Wilson
Columbia 8.7
Columbia Sabre
Columbia 8.7
Columbia Sabre
-
- Master of the Arcane
- Posts: 2272
- Joined: Sat Oct 04, 2003 10:55 pm
- Boat Name: Jenny
- Boat Type: 1966 Pearson Triton
- Location: Rowley, MA
- Contact:
With a D-8 caterpillar engine featuring individual chromed exhaust stacks turning twin 24" screws. Think of the havoc you could create in the "No Wake" zone :-)I've been thinking of going the other way... motorsailer (sailor?) conversion!!!
I have a feeling Tim will pass on this one, been there done that after all, but there must be someone else out there who might want their own version of a Triton daysailor. I think it has been proven that the concept has merit.
-Britton
-
- Deck Grunge Scrubber
- Posts: 35
- Joined: Sat Dec 24, 2005 10:49 am
- Location: Prince Edward Island Canada
-
- Candidate for Boat-Obsession Medal
- Posts: 393
- Joined: Mon Jan 17, 2005 9:59 am
- Location: Marshall, Virginia
Bruce,
More telling to me seems to be the obvious paint delamination and water marks below that might indicate a fair amount of water damage (though I may the least qualified person on this forum to know). I wasn't that discriminating when chosing my "project" Triton, and there have been a fair share of surprises. I'm sure I could be well ahead of were I am now if I had gone for one in a little better shape. Still, I have enjoyed the unique challenges of "my boat".
It would be easy to say that this boat isn't worth the effort. One could easily make the argument that there would be a better value out there. Still, it is sad to think this one has no future.
I know there was a professional rigger in Deltaville, VA who had made all new spars and rigging for a Triton, but the deal somehow fell through. He was looking to sell the whole package last summer, but I'm sure it will not be cheap. It didn't appeal that much to me at the time, but he may still have it.
Joe
I'm not sure that there is much difference here between a "little" soft and " really" soft. I'm told these East Cost Tritons are all going to have some kind of deck problems no matter the appearant symptoms from above. Mine was fairly dry when I removed the core, but I think I'll be glad that I did the recore even though I have a fair ways to go to finish it. You could find a boat that is "servicable", but it seems like these 45 year old decks are all approaching the end of their usefull lives, so maybe that would not be the disqualifier that it first appears. It seems that if one wants to keep a solid EC Triton for several more years, they would need to be prepared for a re-core in the not to distant future.However the line that says "the decks are really soft" scares me...
More telling to me seems to be the obvious paint delamination and water marks below that might indicate a fair amount of water damage (though I may the least qualified person on this forum to know). I wasn't that discriminating when chosing my "project" Triton, and there have been a fair share of surprises. I'm sure I could be well ahead of were I am now if I had gone for one in a little better shape. Still, I have enjoyed the unique challenges of "my boat".
It would be easy to say that this boat isn't worth the effort. One could easily make the argument that there would be a better value out there. Still, it is sad to think this one has no future.
I know there was a professional rigger in Deltaville, VA who had made all new spars and rigging for a Triton, but the deal somehow fell through. He was looking to sell the whole package last summer, but I'm sure it will not be cheap. It didn't appeal that much to me at the time, but he may still have it.
Joe
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
A free boat is as cheap a place to start as possible, of course. It's clear that this is a serious project boat, and will require a gut job. The decks are the least of the problem. Only the strong need apply for this "free" boat...but for the right, motivated person, she'd be a great platform from which to start. Just don't expect to be sailing on her for a few years, anyway.brucebrown100@yahoo.com wrote:Well the price is right and the hull looks to be in not too bad of shape.
However the line that says "the decks are really soft" scares me. Anyone
know of a boat mover in Maryland that ships to Atlantic Canada?
-Bruce
If the prospect of soft decks scares you, then this is probably not the boat! I say she is worth saving, but not from a purely financial standpoint. Even the lowest-level "restoration" on this boat would cost more than the boat might be worth afterwards, given the need to completely re-outfit the boat in terms of spars, sails, engine...
If I were closer I'd take her. Unfortunately, transport is too much to deal with given all the other things going on right now.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Master of the Arcane
- Posts: 2272
- Joined: Sat Oct 04, 2003 10:55 pm
- Boat Name: Jenny
- Boat Type: 1966 Pearson Triton
- Location: Rowley, MA
- Contact:
Does this mean you are entertaining more plans for a Radical Triton Transformation?Tim wrote:If I were closer I'd take her
After I posted my last comment I realized Mike is problably serious about a motorsailor. Might be an interesting idea but I have a personal distaste for motorsailors so I wouldn't seriously entertain the option. At the last yard I was at someone took a rather ugly sailboat hull with a good motor, cut the deck off and was in the process of building an aft pilot house with the idea of creating a vessel for offshore fishing. Rather odd looking and didn't get too far before his interest waned.
I think this boat is worth the asking price or maybe a little less... But that is how I feel after I have taken on a project starting with a much healthier boat. I am scared of gut jobs.
Soft decks seems pretty standard on these old boats but I wouldn't say it is inevitable. Proper preventative maintenance and upkeep should keep the decks viable indefinitely (I am really hoping).
That is probably the most perfect and realistic opinion possible. The voice of real experience.Only the strong need apply for this "free" boat...but for the right, motivated person, she'd be a great platform from which to start. Just don't expect to be sailing on her for a few years, anyway.
-Britton
-
- Master of the Arcane
- Posts: 2272
- Joined: Sat Oct 04, 2003 10:55 pm
- Boat Name: Jenny
- Boat Type: 1966 Pearson Triton
- Location: Rowley, MA
- Contact:
I should add concerning soft decks that in my own experience, my boat was reportedly stored under cover for all or most of its life, coming out for only two months every season. My decks are pretty good and should stay that way at least through my lifetime :-) That is partly why I paid real money (relative to Tritons) for my boat. It didn't come to me as a true project boat, just a casual fix-as-you-go sort of boat that got out of control. You all know how that goes...
-Britton
-Britton
-
- Boateg
- Posts: 1637
- Joined: Thu Apr 03, 2003 9:09 am
- Boat Name: Dasein
- Boat Type: Pearson Triton 668
- Location: Portland, Maine
- Contact:
Especially if you don't get your respirator fixed! Did you actually find a source? I know you mentioned being on the phone all day...bcooke wrote:IMy decks are pretty good and should stay that way at least through my lifetime :-)
Nathan
dasein668.com
dasein668.com
-
- Master of the Arcane
- Posts: 2272
- Joined: Sat Oct 04, 2003 10:55 pm
- Boat Name: Jenny
- Boat Type: 1966 Pearson Triton
- Location: Rowley, MA
- Contact:
A friend working at a marina knows a source. I spent WAY too much time online with nothing to show for it. I did notice that the respirator in question can be had for only $80 now. Still, I would rather pay $5 for the spare parts. I found and priced them but no one seems to have them in stock.
-Britton
-Britton
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
I'm actually rather intrigued by that thought, just because it's different. Is this something you've thought through, or are you just being silly?Figment wrote:I've been thinking of going the other way... motorsailer (sailor?) conversion!!!
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
- Master of the Arcane
- Posts: 2272
- Joined: Sat Oct 04, 2003 10:55 pm
- Boat Name: Jenny
- Boat Type: 1966 Pearson Triton
- Location: Rowley, MA
- Contact:
I am not more patient. I can't find the parts and my life is going down the drain without them so I am resorting to whining and pleading to everyone I know. This friend may be my last hope... I am actually tempted to just order a new respirator but my credit card might not have enough bounce left in it.You're more patient than I. I would have had a new one ordered for delivery the next day!
-Britton